Abstract:The lifetime of an opposed-contact vanadium-compensation semi-insulating 4H-silicon carbide (VCSI 4H-SiC) photoconductive semiconductor switch (PCSS) was investigated. The experimental setup involved a laser wavelength of 532 nm, a bias voltage of 19 kV, and a maximum photocurrent of 200 A. After 678 high power switching cycles, the 4H-SiC PCSS was fragmented along two crystal planes. The simulation of electric fields near the electrodes is on the order of the theoretical critical breakdown field strength of SiC. Due to the distribution of the electric field, the ionization rate at the edge of the electrodes is comparatively high. Scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) were used to analyze the cross-sectional morphology and elemental characteristics of the fragments. It was found that there was only carbon phase but no silicon phase near the electrodes. The simulation results show that the maximum temperature of the device is 1865 K, which is lower than the gas phase temperature of silicon atoms in silicon carbide. During the pinch process, the carrier density increases due to the shrinking of the current channel radius, which increases the temperature of the device. When the current density is , the device temperature increment can reach 2546 K. Furthermore, the corresponding parameters are = 0.86 and = 0.94 in the pinch effect process. The difference in thermal expansion coefficient and elastic modulus between the metal electrode and SiC substrate, as well as the difference in temperature between materials, lead to the greatest thermal stress near the electrodes, which is confirmed by the cracks at the edge of electrodes.

Time-domain AC characterization of silicon carbide (SiC) nanoelectromechanical switches toward high-speed operations

Characterization of Electrical Parameters for Health Monitoring in SiC MOSFETs during AC Power Cycling

Electrostatically actuated silicon-based nanomechanical switch at room temperature

Nanoelectromechanical Switches with Vertically Aligned Carbon Nanotubes

Static and Dynamic Behaviour of SiC JFET/Si MOSFET Cascade Configuration for High-Performance Power Switches

Transient analysis of Si-MOS and SiC-JFET cascode power switches

Fast SiC Switching Limits for Pulsed Power Applications

High-Temperature Characterization of a 1.2-Kv SiC MOSFET Using Dynamic Short-Circuit Measurement Technique

Evaluation of Advanced Si and SiC Switching Components for Army Pulsed Power Applications

Advances in SiC materials and devices: an industrial point of view

Nanoscale Characterization of Resistive Switching Using Advanced Conductive Atomic Force Microscopy Based Setups

Influence of Pinch Effect on the Lifetime of a 2MW Silicon Carbide Photoconductive Semiconductor Switch

Laterally Actuated Si-to-Si DC MEMS Switch for Power Switching Applications

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

Status of Silicon Carbide Micromachining, Circuits and Sensing Devices

Electrical Characterization of 1.2kv SiC MOSFET at Extremely High Junction Temperature

full papers 2910 Resistive switching Resistive Switching in Nanogap Systems on SiO 2 Substrates

4H–SiC photoconductive switching devices for use in high-power applications

Silicon carbide for microelectromechanical systems

Carbon-Carbon Contacts for Robust Nanoelectromechanical Switches

Opportunities, Challenges, and Potential Solutions in the Application of Fast-Switching SiC Power Devices and Converters