Abstract:The resistive random access memory (RRAM) has stimulated a variety of promising applications including programmable analog circuit, massive data storage, neuromorphic computing, etc. These new emerging applications have huge demands on high integration density and low power consumption. The cross-point configuration or passive array, which offers the smallest footprint of cell size and feasible capability of multi-layer stacking, has received broad attention from the research community. In such array, correct operation of reading and writing on a cell relies on effective elimination of the sneaking current coming from the neighboring cells. This target requires nonlinear I – V characteristics of the memory cell, which can be realized by either adding separate selector or developing implicit build-in nonlinear cells. The performance of a passive array largely depends on the cell nonlinearity, reliability, on/off ratio, line resistance, thermal coupling, etc. This article provides a comprehensive review on the progress achieved concerning 3D RRAM integration. First, the authors start with a brief overview of the associative problems in passive array and the category of 3D architectures. Next, the state of the arts on the development of various selector devices and self-selective cells are presented. Key parameters that influence the device nonlinearity and current density are outlined according to the corresponding working principles. Then, the reliability issues in 3D array are summarized in terms of uniformity, endurance, retention, and disturbance. Subsequently, scaling issue and thermal crosstalk in 3D memory array are thoroughly discussed, and applications of 3D RRAM beyond storage, such as neuromorphic computing and CMOL circuit are discussed later. Summary and outlooks are given in the final.

3-D Cross-Point Array Operation on -Based Vertical Resistive Switching Memory

Fully Coupled Electrothermal Simulation of Resistive Random Access Memory (RRAM) Array

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

3D RRAM: Design and optimization

HfOx-based vertical resistive switching random access memory suitable for bit-cost-effective three-dimensional cross-point architecture.

Parallel Modeling Fully Coupled Multiphysics Process in Resistive Random Access Memory Array

3-D Resistive Memory Arrays: from Intrinsic Switching Behaviors to Optimization Guidelines

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

HfOx based vertical resistive random access memory for cost-effective 3D cross-point architecture without cell selector

Resistive Switching Memory for High Density Storage and Computing*

Scaling and Operation Characteristics of HfOx Based Vertical RRAM for 3D Cross-Point Architecture

Study of Multi-Level Characteristics for 3D Vertical Resistive Switching Memory.

Design And Optimization Methodology For 3d Rram Arrays

A Novel Three-Dimensional High Density Vertical Rram Arrays with Reduced Leakage Current

4‐bit Multilevel Operation in Overshoot Suppressed Al2O3/TiOx Resistive Random‐Access Memory Crossbar Array

Occurrence of Resistive Switching and Threshold Switching in Atomic Layer Deposited Ultrathin (2 nm) Aluminium Oxide Crossbar Resistive Random Access Memory

Towards high-speed, write-disturb tolerant 3D vertical RRAM arrays

Complementary Switching in 3D Resistive Memory Array

Improving Write Performance on Cross-Point RRAM Arrays by Leveraging Multidimensional Non-Uniformity of Cell Effective Voltage

Statistical assessment methodology for the design and optimization of cross-point RRAM arrays

Thermal Crosstalk in 3-Dimensional RRAM Crossbar Array