Abstract:High static power associated with static random access memory (SRAM) represents a bottleneck in increasing the amount of on-chip memory. Novel, emerging nonvolatile memories such as spintransfer torque magnetic random access memory (STT-RAM), resistive random access memory (RRAM), and ferroelectric field effect transistor-based random access memory (FeFET-RAM) are alternatives for replacing hardware kernels such as SRAM-based last level caches (LLC) due to their fast access times and lower leakage. In this paper, we study an ultra-dense FeFET-RAM based on 1-FeFET memory cells, and address potential disturbance issues at the array level. Disturbances are studied experimentally and via simulation. Experimental measurements are well correlated with modeling results suggesting that we have a good understanding of how disturbance issues will manifest themselves. That said, previous WRITE schemes for 1-FeFET arrays may: 1) exacerbate disturbances and 2) significantly degrade figures of merit (FoM) such as WRITE power. To address these issues, we propose the use of columnwise body connections to simultaneously overcome disturbances and reduce leakage currents during WRITES. We present detailed studies on how 1-FeFET memory cells and arrays (with columnwise body bias) fare when compared to traditional SRAM approaches and other emerging technologies. Notably, we benchmark the 1-FeFET memory against 1T + 1FeFET and 2T + 1FeFET designs proposed in early works, as well as SRAM, STTRAM, and RRAM. Our evaluation of a 64×64 FeFET-RAM array shows that the area, READ delay, and static power are reduced by ~5.3×, ~1.5×, and ~74×, respectively, when compared to an SRAM equivalent. Also, the 1-FeFET memory cell design shows ~50× improvements in terms of WRITE energy with respect to STTRAM and RRAM counterparts.

High-speed and low-power FRAM with a bitline-segmental array

High-speed and Low-Power Feram Utilising Merged BL/PL Array Architecture with Twin-Bitline-driven Scheme

A Novel Scheme of Cross Bitlines for Feram Array

An Energy Efficient Floating Point Computing Infrastructure Embedding Ferroelectric Field Effect Transistor Based Ternary Content Addressable Memories

Novel Multilevel Non-Destructive-Read-Out (ndro) Ferroelectric Floating-Gate Random Access Memory (Ffram)

Research on Circuit Design Techniques for 1 kbit Ferroelectric Random Access Memory

Energy Efficient Adiabatic FRAM with 0.99 PJ/Bit Write for IoT Applications

A Novel Chain Fram With Driven Plate Read Scheme

A low-Power SRAM with charge cycling based read and write assist scheme

Reference Voltage Generation Scheme Enhancing Speed and Reliability for 1t1c‐type FRAM

Design Space Exploration of FeRAM Bit Cell for DRAM Application

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

Design of a 4 k Bit Ferroelectric Memory

FeFET-Based Logic-in-Memory Supporting SA-Free Write-Back and Fully Dynamic Access with Reduced Bitline Charging Activity and Recycled Bitline Charge

A Self-Terminated Operation Scheme for High-Parallel and Energy-Efficient Forming of RRAM Array

A Semi‐Floating Memory with 535% Enhancement of Refresh Time by Local Field Modulation

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

Improving Write Performance on Cross-Point RRAM Arrays by Leveraging Multidimensional Non-Uniformity of Cell Effective Voltage

A Fast Bitline Capacitance Evaluation Method for Designing Ferroelectric Random Access Memory

FeFET-based low-power bitwise logic-in-memory with direct write-back and data-adaptive dynamic sensing interface