Abstract:Ferroelectric random access memory (FeRAM) is believed to be the most promising candidate for the next generation non-volatile memory due to its fast access time and low power consumption. Fabrication technologies of FeRAM can be divided into two parts: CMOS technologies for circuits which are standard and can be shared with traditional IC process line, and process relating to ferroelectric which is separated with CMOS process and defined as backend module. This paper described technologies for integrating ferroelectric capacitors into standard CMOS, mainly about modeling of ferroelectric capacitors and backend fabrication technologies. Hysteresis loop of the ferroelectric capacitor is the basis for FeRAM to store data. Models to describe this characteristic are the key for the design of FeRAM. A transient behavioral ferroelectric capacitor model based on C-V relation for circuit simulation is developed. The arc tangent function is used to describe the hysteresis loop. “Negative capacitance” phenomenon at reversing points of applied voltage is analyzed and introduced to the model to describe transient behaviors of the capacitor. Compact equivalent circuits are introduced to integrate this model into HSPICE for circuit simulation. Ferroelectric materials fabrication, electrodes integration and etching are the main technologies of FeRAM fabrication process. An metal organic chemical vapor deposition (MOCVD) process is developed to fabricate high quality Pb(Zr1-xTix)O3 (PZT) films. Pt is known to cause the fatigue problems when used as electrodes with PZT. Ir is used as electrodes to improve the fatigue property of PZT based capacitors, and mechanism of the fatigue is analyzed. Hard mask is used to reduce the size of the capacitors and damage caused in etching process. In our process, Al2O3 is developed as hard mask, which simplifies the FeRAM backend integration process.

High-speed and Low-Power Feram Utilising Merged BL/PL Array Architecture with Twin-Bitline-driven Scheme

An Energy Efficient Floating Point Computing Infrastructure Embedding Ferroelectric Field Effect Transistor Based Ternary Content Addressable Memories

Analog Content Addressable Memory using Ferroelectric: A Case Study of Search-in-Memory

A Novel Scheme of Cross Bitlines for Feram Array

FeRAM using Anti-ferroelectric Capacitors for High-speed and High-density Embedded Memory

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

Design of a 4 k Bit Ferroelectric Memory

FeFET-Based Logic-in-Memory Supporting SA-Free Write-Back and Fully Dynamic Access with Reduced Bitline Charging Activity and Recycled Bitline Charge

Key Technologies for Feram Backend Module

A Novel Circuit Scheme And Analysis For Three-Level Feram

Research on Circuit Design Techniques for 1 kbit Ferroelectric Random Access Memory

Energy Efficient Data Search Design and Optimization Based on a Compact Ferroelectric FET Content Addressable Memory

Design Space Exploration of FeRAM Bit Cell for DRAM Application

A Fast Bitline Capacitance Evaluation Method for Designing Ferroelectric Random Access Memory

Design and Simulation Analysis of a 3TnC MLC FeRAM Using a Nondestructive Readout and Offset-Canceled Sense Amplifier for High-Density Storage Applications

FeFET-based low-power bitwise logic-in-memory with direct write-back and data-adaptive dynamic sensing interface

A 9mb HZO-Based Embedded FeRAM with 10-Cycle Endurance and 5/7ns Read/Write Using ECC-Assisted Data Refresh and Offset-Canceled Sense Amplifier.

Nonvolatile Memory Design Based on Ferroelectric FETs.

A 9mb HZO-Based Embedded FeRAM with 1012-Cycle Endurance and 5/7ns Read/Write Using ECC-Assisted Data Refresh and Offset-Canceled Sense Amplifier

Improved Multibit Storage Reliability by Design of Ferroelectric Modulated Antiferroelectric Memory

A low-Power SRAM with charge cycling based read and write assist scheme