Abstract:Ferroelectric random access memory (FeRAM) is believed to be the most promising candidate for the next generation non-volatile memory due to its fast access time and low power consumption. Fabrication technologies of FeRAM can be divided into two parts: CMOS technologies for circuits which are standard and can be shared with traditional IC process line, and process relating to ferroelectric which is separated with CMOS process and defined as backend module. This paper described technologies for integrating ferroelectric capacitors into standard CMOS, mainly about modeling of ferroelectric capacitors and backend fabrication technologies. Hysteresis loop of the ferroelectric capacitor is the basis for FeRAM to store data. Models to describe this characteristic are the key for the design of FeRAM. A transient behavioral ferroelectric capacitor model based on C-V relation for circuit simulation is developed. The arc tangent function is used to describe the hysteresis loop. “Negative capacitance” phenomenon at reversing points of applied voltage is analyzed and introduced to the model to describe transient behaviors of the capacitor. Compact equivalent circuits are introduced to integrate this model into HSPICE for circuit simulation. Ferroelectric materials fabrication, electrodes integration and etching are the main technologies of FeRAM fabrication process. An metal organic chemical vapor deposition (MOCVD) process is developed to fabricate high quality Pb(Zr1-xTix)O3 (PZT) films. Pt is known to cause the fatigue problems when used as electrodes with PZT. Ir is used as electrodes to improve the fatigue property of PZT based capacitors, and mechanism of the fatigue is analyzed. Hard mask is used to reduce the size of the capacitors and damage caused in etching process. In our process, Al2O3 is developed as hard mask, which simplifies the FeRAM backend integration process.

A Novel Circuit Scheme And Analysis For Three-Level Feram

Analog Content Addressable Memory using Ferroelectric: A Case Study of Search-in-Memory

Design and Simulation Analysis of a 3TnC MLC FeRAM Using a Nondestructive Readout and Offset-Canceled Sense Amplifier for High-Density Storage Applications

Research on Circuit Design Techniques for 1 kbit Ferroelectric Random Access Memory

High-speed and Low-Power Feram Utilising Merged BL/PL Array Architecture with Twin-Bitline-driven Scheme

A Novel 3D 2TnC FeRAM Architecture and Operation Scheme with Improved Disturbance for High-Bit-Density Dynamic Random-Access Memory

In-situ TEM Observation of Multilevel Storage Behavior in Low Power FeRAM Device

Reference Voltage Generation Scheme Enhancing Speed and Reliability for 1t1c‐type FRAM

Key Technologies for Feram Backend Module

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

FeRAM using Anti-ferroelectric Capacitors for High-speed and High-density Embedded Memory

New Understanding of Screen Radius and Re-evaluation of Memory Window in Cylindrical Ferroelectric Capacitor for High-density 1T1C FeRAM

Novel Multilevel Non-Destructive-Read-Out (ndro) Ferroelectric Floating-Gate Random Access Memory (Ffram)

Ferroelectric FETs-Based Nonvolatile Logic-in-Memory Circuits

A 3t/cell Practical Embedded Nonvolatile Memory Supporting Symmetric Read and Write Access Based on Ferroelectric FETs

A Novel Design for Multilevel Storage and Superb Reliability in Phase-Change Memory

The Performance of FRAM Integrated With 3D Trench Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> Ferroelectric Capacitor

A Fundamental Study on Application of FeRAM in FPGA

Working Principles and Performance Optimization of Nonvolatile 6T2C-SRAM with Hafnia-Based Ferroelectric Capacitors

A Common Source 3D FeFET with Disturb Inhibition Program and Erase Method

FeRAM: A Paradigm of Advanced Data Storage Technology