Abstract:Ferroelectric random access memory (FeRAM) is believed to be the most promising candidate for the next generation non-volatile memory due to its fast access time and low power consumption. Fabrication technologies of FeRAM can be divided into two parts: CMOS technologies for circuits which are standard and can be shared with traditional IC process line, and process relating to ferroelectric which is separated with CMOS process and defined as backend module. This paper described technologies for integrating ferroelectric capacitors into standard CMOS, mainly about modeling of ferroelectric capacitors and backend fabrication technologies. Hysteresis loop of the ferroelectric capacitor is the basis for FeRAM to store data. Models to describe this characteristic are the key for the design of FeRAM. A transient behavioral ferroelectric capacitor model based on C-V relation for circuit simulation is developed. The arc tangent function is used to describe the hysteresis loop. “Negative capacitance” phenomenon at reversing points of applied voltage is analyzed and introduced to the model to describe transient behaviors of the capacitor. Compact equivalent circuits are introduced to integrate this model into HSPICE for circuit simulation. Ferroelectric materials fabrication, electrodes integration and etching are the main technologies of FeRAM fabrication process. An metal organic chemical vapor deposition (MOCVD) process is developed to fabricate high quality Pb(Zr1-xTix)O3 (PZT) films. Pt is known to cause the fatigue problems when used as electrodes with PZT. Ir is used as electrodes to improve the fatigue property of PZT based capacitors, and mechanism of the fatigue is analyzed. Hard mask is used to reduce the size of the capacitors and damage caused in etching process. In our process, Al2O3 is developed as hard mask, which simplifies the FeRAM backend integration process.

FeRAM: A Paradigm of Advanced Data Storage Technology

Computing-In-Memory Using Ferroelectrics: From Single- to Multi-Input Logic

Key Technologies for Feram Backend Module

FeRAM using Anti-ferroelectric Capacitors for High-speed and High-density Embedded Memory

FETRAM. An Organic Ferroelectric Material Based Novel Random Access Memory Cell

In Memory Energy Application for Resistive Random Access Memory

Resistive Random Access Memory (RRAM): an Overview of Materials, Switching Mechanism, Performance, Multilevel Cell (mlc) Storage, Modeling, and Applications

Model and key fabrication technologies for FeRAM

Compute-In-Place Serial FeRAM: Enhancing Performance, Efficiency and Adaptability in Critical Embedded Systems

Hafnia-Based Ferroelectric Memory: Device Physics Strongly Correlated with Materials Chemistry

An overview of critical applications of resistive random access memory

Resistive Random Access Memory for Future Information Processing System.

High-speed and Low-Power Feram Utilising Merged BL/PL Array Architecture with Twin-Bitline-driven Scheme

Ferroelectric Devices for Content-Addressable Memory

Nonvolatile Memory Design Based on Ferroelectric FETs.

Research on Circuit Design Techniques for 1 kbit Ferroelectric Random Access Memory

Design and Analysis of an Ultra-Dense, Low-Leakage, and Fast FeFET-Based Random Access Memory Array

A 9mb HZO-Based Embedded FeRAM with 1012-Cycle Endurance and 5/7ns Read/Write Using ECC-Assisted Data Refresh and Offset-Canceled Sense Amplifier

Design of a 4 k Bit Ferroelectric Memory

Ferroelectric Domain Wall Memory and Logic

Resistive random access memory: introduction to device mechanism, materials and application to neuromorphic computing