Abstract:High-density embedded nonvolatile memory (eNVM) at advanced technology nodes is still in great demand for SOC chips used in consumer electronics, self-driving cars, industrial control, and IoT edge devices. Although embedded NOR Flash is still main stream, its process complexity and high integration cost make it difficult to scale beyond 28nm. RRAM has become a promising alternative owing to its excellent scalability, low power, and compatibility with logic processes [1 –6]. However, several challenges still exist that restrict RRAM from practical eNVM applications, as shown in Fig. 24.2.1. 1) a high supply voltage is needed, because of high operation voltages and a considerable voltage drop on write path. 2) The IR drop on write path varies significantly with the distance of a cell from the peripheral circuits. 3) Prior self-write termination (SWT), with its abrupt cutoff, fails to form dense conductive filaments (CFs). While delayed termination helps to alleviate this issue, its delay time is not optimized for fast and slow cells [3]. 4) Previous read reference schemes that use a small number of HRS/LRS cells may collapse when encountering tail bits, resulting in a poor reference [6]. In this work, we demonstrate a 1Mb 14nm-FinFET RRAM with a $0.022 \\mu m^{2}$ cell size. The cell array is in a deep N-well with adequate P-substrate biasing to alleviate the difficulty of high voltage transfer. Placing the bit line (BL) and source line (SL) drivers on the top and bottom of the array reduces the IR-drop variation for near and far cells. Self-adaptive delayed termination (SADT) adjusts the termination time according to cell characteristics (fast or slow), helping to generate robust CFs. A read reference with multiple dummy 1T1R cells avoids the reference collapse issue. The test chip supports reliable read operation at a minimum supply voltage of 0.5V from $-40^{\\circ}C$ to $125^{\\circ}C$.

Energy Efficient Adiabatic FRAM with 0.99 PJ/Bit Write for IoT Applications

Pure logic CMOS based embedded Non-Volatile Random Access Memory for low power RFID application

Resonant Energy Recycling SRAM Architecture

A 462gops/j RRAM-based Nonvolatile Intelligent Processor for Energy Harvesting IoE System Featuring Nonvolatile Logics and Processing-in-memory

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

A Pure Logic Cmos Based Low Power Non-Volatile Random Access Memory For Rfid Application

A 0.13μm 64Mb HfO<inf>x</inf> ReRAM using configurable ramped voltage write and low read-disturb sensing techniques for reliability improvement

A 0.13 mu m 64Mb HfOx ReRAM Using Configurable Ramped Voltage Write and Low Read-Disturb Sensing Techniques for Reliability Improvement

A Fully Logic CMOS Compatible Non-Volatile Memory for Low Power IoT Applications

Single-Mode CMOS 6T-SRAM Macros With Keeper-Loading-Free Peripherals and Row-Separate Dynamic Body Bias Achieving 2.53fW/bit Leakage for AIoT Sensing Platforms

A 14nm-Finfet 1mb Embedded 1t1r Rram With A 0.022 Mu M(2) Cell Size Using Self-Adaptive Delayed Termination And Multi-Cell Reference

A 65-Nm ReRAM-Enabled Nonvolatile Processor with Time-Space Domain Adaption and Self-Write-Termination Achieving $> 4\times $ Faster Clock Frequency and $> 6\times $ Higher Restore Speed

A low-Power SRAM with charge cycling based read and write assist scheme

An Ultra-Low-Power Embedded EEPROM for Passive RFID Tags

4.7 A 65nm ReRAM-enabled nonvolatile processor with 6× reduction in restore time and 4× higher clock frequency using adaptive data retention and self-write-termination nonvolatile logic

A ReRAM-based Single-Nvm Nonvolatile Flip-Flop with Reduced Stress-Time and Write-Power Against Wide Distribution in Write-Time by Using Self-Write-termination Scheme for Nonvolatile Processors in IoT Era

24.2 A 14nm-FinFET 1Mb Embedded 1T1R RRAM with a 0.022µm<sup>2</sup> Cell Size Using Self-Adaptive Delayed Termination and Multi-Cell Reference

Ultralow Power Resistance Random Access Memory Device and Oxygen Accumulation Mechanism in an Indium–Tin-Oxide Electrode

A 9mb HZO-Based Embedded FeRAM with 1012-Cycle Endurance and 5/7ns Read/Write Using ECC-Assisted Data Refresh and Offset-Canceled Sense Amplifier

FeFET-Based Logic-in-Memory Supporting SA-Free Write-Back and Fully Dynamic Access with Reduced Bitline Charging Activity and Recycled Bitline Charge

Ultra8T: A Sub-Threshold 8T SRAM with Leakage Detection