Abstract:Ultra-Low-Power Non-Volatile Memory (UltraRAM), as a promising storage device, has attracted wide research attention from the scientific community. Non-volatile data retention in combination with switching at ≤2.6 V is achieved through the use of the extraordinary 2.1 eV conduction band offsets of InAs/AlSb and a triple-barrier resonant tunnelling structure. Along these lines, in this work, the structure, storage mechanism, and improvement strategies of UltraRAM were systematically investigated to enhance storage window clarity and speed performance. First, the basic structure and working principle of UltraRAM were introduced, and its comparative advantages over traditional memory devices were highlighted. Furthermore, through the validation of the band structure and storage mechanism, the superior performance of UltraRAM, including its low operating voltage and excellent non-volatility, was further demonstrated. To address the issue of the small storage window, an improvement strategy was proposed by reducing the thickness of the channel layer to increase the storage window. The feasibility of this strategy was validated by performing a series of simulation-based experiments. From our analysis, a significant 80% increase in the storage window after thinning the channel layer was demonstrated, providing an important foundation for enhancing the performance of UltraRAM. Additionally, the data storage capability of this strategy was examined under the application of short pulse widths, and a data storage operation with a 10 ns pulse width was successfully achieved. In conclusion, valuable insights into the application of UltraRAM in the field of non-volatile storage were provided. Our work paves the way for further optimizing the memory performance and expanding the functionalities of UltraRAM.

A Pure Logic Cmos Based Low Power Non-Volatile Random Access Memory For Rfid Application

Pure logic CMOS based embedded Non-Volatile Random Access Memory for low power RFID application

A Low-Power, Single-Poly, Non-Volatile Memory for Passive RFID Tags

Variation-Tolerant Cuxsiyo-Based Rram For Low Power Application

A Fully Logic CMOS Compatible Non-Volatile Memory for Low Power IoT Applications

A Single-Poly EEPROM with Low Leakage Charge Pump and Peripheral Circuits for Passive RFID Tag in a Standard CMOS Technology

An Ultra-Low-Power Embedded EEPROM for Passive RFID Tags

A 64-Kbit Embedded RRAM for Passive UHF RFID Transponders

A CuxO-based resistive memory with low power and high reliability for SOC nonvolatile memory applications

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

A Security-Enhanced, Charge-Pump-Free, ISO14443-A-/ISO10373-6-Compliant RFID Tag with 16.2-Μw Embedded RRAM and Reconfigurable Strong PUF

Optimisation Design For Eeprom Embedded In Uhf-Rfid Passive Transponders

A Low-Power Optimization Method for Memory and Its Application

Design Of Almost-Nonvolatile Embedded Dram Using Nanoelectromechanical Relay Devices

Ultralow-voltage, low-power baseband processor for UHF RFID tags

An Ultra Low Power Digital Processor for Chinese UHF RFID Transponder

An Ultra Low-Voltage, Low-Power Baseband-Processor for UHF RFID Tag

TCAD Simulation Studies on Ultra-Low-Power Non-Volatile Memory

A Novel Voltage-Type Sense Amplifier for Low-Power Nonvolatile Memories

Low Power In-Memory Computing Based On Dual-Mode Sot-Mram

An Ultra-Low-power 1 Kb Sub-Threshold SRAM in the 180 Nm CMOS Process