Low Power Design of UHF RFID Tag Baseband Processor
Wang Xiaohui,Zhang Chun,Ma Changming,Wu Xingjun,Zhu Qiuling
DOI: https://doi.org/10.3969/j.issn.1003-353x.2009.05.028
2009-01-01
Abstract:Considering that RFID application is becoming increasingly wider,it is urgent to improve the performance of RFID tag. For passive RFID tag,one of the important specifications is operating distance,which can be extended by reducing the power consumption of tag. The digital baseband design of UHF RFID tag based on ISO18000-6 Type C protocol was presented,and some low power design technologies were introduced.RFID application and ISO18000-6 Type C protocol were introduced,the architecture of the design was described. A series of low power design strategies were given,such as dynamic control of clock,reuse of registers,using counter and combinational logic instead of shift registers,asynchronous counter,clock-gating,etc. The simulation results indicate that the power of digital baseband processor are reduced effectively,which is about 4.8 μW under 2.5 MHz clock frequency with 1 V power supply. And the chip which implemented the first three strategies consumes 8.03 μW under 2.5 MHz clock frequency with 1 V power supply.