Abstract:Cavity BPMs are crucial for achieving submicron beam alignment in X-ray Free-Electron Lasers (XFEL), particularly in undulator sections. These monitors typically generate RF signals in the S, C, or X band regions. Due to the limitations of analog-to-digital converter's (ADC) bandwidth and sampling rates, and digital signal processing capabilities, heterodyne and homodyne receivers are often employed to down-convert the RF signal to an intermediate frequency (IF) or baseband (Zero IF) respectively before digital sampling. The digitized signal is then processed by Field Programmable Gate Array (FPGA) to get the beam position and phase information. An RF direct-sampling beam signal processor has been developed using ADCs with a bandwidth of 9 GHz and a sampling rate of 2.6 GSPS, and a powerful system-on-chip FPGA. In addition, a prototype RF module without complex down conversion devices has been designed for the SHINE (Shanghai High Repetition Rate XFEL and Extreme Light Facility) cavity BPM. The processor and the RF module make a novel RF direct sampling and processing cavity BPM electronics for SHINE. This is the first attempt to use direct sampling electronics in the C band cavity BPM system. The analog signal processing chain is greatly simplified compared to the down-conversion structure. The performance of this electronics has been analyzed and evaluated in laboratory. The amplitude relative error is 2.0×10 -4 , surpassing the required accuracy of 1×10 -3 for cavity BPM systems. The phase error is 14 femtoseconds (fs), which also meets the requirements for an RF Beam Arrival Time Monitor (BAM) system. Additionally, the paper introduces the cavity BPM signal processing algorithms and their implementation in FPGA. The processor can deliver pulse-to-pulse beam position measurement above 1MHz. The RF direct-sampling electronics represents significant advancements in cavity BPM system, large-scale application can be carried out in accelerator facilities like SHINE.

A beam phase and energy measurement system based on direct RF signal IQ under-sampling technology

A Beam Phase and Energy Measurement Instrument Based on Direct RF Signal IQ Undersampling Technique

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

The Design and Initial Testing of the Beam Phase and Energy Measurement System for DTL in the Proton Accelerator of CSNS

Design and Measurement of Signal Processing System for Cavity Beam Position Monitor

Digital phase control system for ssrf linac

Design of rf front end for cavity beam position monitor based on ics *

Beam instrumentation system development and commissioning in ssrf

Beam Position and Phase Measurement System for the Proton Accelerator in ADS

Design of beam phase measurement electronics system based on sub-sampling technology

The design and initial testing of the beam position measurement system in SSRF based on fully digital signal processing

A Beam Position Measurement System of Fully Digital Signal Processing at Ssrf

Application of Real-Time Digitization Techniques in Beam Measurement for Accelerators

A Prototype of Beam Position and Phase Measurement Electronics for the LINAC in ADS

Application of Real-time Digitization Technique in Beam Measurement for Accelerators

Prototype design of a digital Low-Level RF system for S3FEL S-band Transverse Deflecting Cavities

RF direct sampling and processing electronics for SHINE cavity BPM system

Development of a Time-of-Flight Electronics System for Neutron Beam Profiling at CSNS-WNS

A New Digital Beam Position and Phase Measurement Implementation Based on a Field Programmable Gate Array for the High Intensity Heavy-Ion Accelerator Ilinac

Measurement and Tuning of the RF Field for the CSNS DTL

Development of a test platform for digital beam position monitor processor at SSRF