Abstract:Transverse Deflecting Cavity (TDC) is generally operated on pulsed mode for beam diagnosis. We plan to deploy two sets of S-band and three sets of X-band TDCs to accurately measure the longitudinal time distribution of ultra-short electron beam pulses in Shenzhen Superconducting Soft X-ray Free Electron Laser (S3FEL). A microwave system of one TDC consists of a Low-Level RF system (LLRF), a solid-state amplifier, waveguide couplers, and a klystron, operated in pulse mode with a maximum repetition frequency of 50 Hz. Its microwave amplitude and phase stability must be better than 0.06%/0.08° (RMS). This article will introduce the prototype design of the hardware, firmware, and software of the digital LLRF system for S-band TDCs. We use homemade local oscillator and commercial cards based on the MicroTCA standard in hardware design. The firmware design will use a Non-IQ demodulation and a reference-tracking algorithm to eliminate the measurement noise and drift. The software design is based on the Experimental Physics and Industrial Control System, achieving data acquisition, slow control, and interface display functions. This technical report will also show some preliminary test results.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to design and implement a digital low - level radio - frequency system (LLRF) in the Shenzhen Superconducting Soft X - ray Free - Electron Laser (S3FEL) to support the accurate measurement of the S - band transverse deflecting cavity (TDC). Specifically, the paper focuses on how to provide stable and controllable microwave power in pulse mode to meet the TDC's requirement for accurate measurement of the longitudinal time distribution of ultrashort electron - beam pulses. This involves the design of hardware, firmware and software, as well as the presentation of preliminary experimental results. ### Main problems 1. **High stability requirements**: The amplitude stability and phase stability of the microwave system need to reach 0.06% (RMS) and 0.08° (RMS) respectively. 2. **Pulse - mode operation**: The system needs to operate in pulse mode with a maximum repetition frequency of 50 Hz. 3. **Multi - band support**: The system needs to support TDCs in the S - band (2997 MHz) and X - band (11,989 MHz). 4. **Noise and drift elimination**: Eliminate noise and drift in the measurement through non - IQ demodulation and reference tracking algorithms. ### Solutions - **Hardware design**: Use self - made local oscillators (LOs) and commercial cards based on the MicroTCA standard to ensure the compactness and reliability of the system. - **Firmware design**: Adopt non - IQ demodulation and reference tracking algorithms to improve the accuracy and stability of signal processing. - **Software design**: Based on the EPICS architecture, implement data acquisition, slow - control and interface display functions. ### Preliminary experimental results - The amplitude and phase stability of the microwave system has reached the expected targets. - The reference tracking algorithm has effectively suppressed the slow - phase drift of the LLRF acquisition channels. Through these designs and experiments, the paper shows how to implement a high - precision TDC measurement system in the S3FEL project.

Prototype design of a digital Low-Level RF system for S3FEL S-band Transverse Deflecting Cavities

Design of rf front end for cavity beam position monitor based on ics *

DEVELOPMENT OF THE SIMULATION SOFTWARE PACKAGE FOR THE CBPM SYSTEM *

Low Field NMR System Based on High T_c DC-SQUID

Development of a digital low-level RF system for the STCF

A beam phase and energy measurement system based on direct RF signal IQ under-sampling technology

High precision rf control for srf cavities in lcls-ii

Design and Application of Multimegawatt X-band Deflectors for Femtosecond Electron Beam Diagnostics

Development of the Prototype of the Cavity BPM System for SHINE

Preliminary Design of a General Electronics Platform for Accelerator Facilities

Digital Low-Level RF System for the Infrared Free-Electron Laser Facility

650 MHz Elliptical Superconducting RF Cavities for CiADS Project

A Precision LLRF Control System for UED

Design and Simulation of 500 MHz Single Cell Superconducting RF Cavity for SILF

The Prgress of the China Material Irradiation Facility RFQ

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity

Implementation of microwave with arbitrary amplitude and phase for the DCLS

Low-level radiofrequency system upgrade for the Dalian Coherent Light Source

Low level radio frequency controller for superconducting third harmonic cavity at SSRF

Low-Level Radio-Frequency system integrated with feed-forward control and vector modulation

Control and Measurement System for the Tuning of A Pefp Low-Beta Superconducting Rf Cavity