Abstract:In order to improvement the detection sensitivity for micro-machined gyroscope, Studying on the driving circuits of the micro-machined gyroscope the dual closed-loop driving scheme for micro-machined gyroscope is proposed , based on the analysis of the phase theory and amplitude theory, and the scheme is verified by using Simulink model. The related circuits have also been implemented. Considering the characteristics of Phase-Locked Loop (PLL), PLL is applied to adjust the frequency of driving signal in accordance with the resonant frequency in the driving mode; the amplitude control includes peak detector, DC comparator and Variable Gain Amplifier (VGA)to achieve the constant amplitude. The simulation results show that, setting time of stable oscillation is at 45 ms and the stable oscillation frequency is 2.755 3 kHz. The frequency difference between driving frequency and resonant frequency is only 0. 1 Hz. Frequency jitter is 0.056 563 Hz. Compared with the traditional closed-loop driving circuits, setting time of the dual closed-loop driving circuits shorten 30.77% . The frequency jitter is 32. 72% of the AGC closed-loop driving circuits for micro-machined gyroscope, the dual closed-loop driving circuits for micro-machined gyroscope improved the quality of the driving signal. So it is significative for the improvement of the detection sensitivity for micro-machined gyroscope.

A CMOS closed-loop driving circuits for micro-mechanical angular rate sensor

Design of CMOS magnetic sensor integrated circuit

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

Cmos Interface Circuitry For A Closed-Loop Capacitive Mems Accelerometer

CMOS interface circuit for closed-loop accelerometer

A low-noise CMOS interface circuit for closed-loop accelerometer

A single-chip CMOS IC for closed-loop control of step motors

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

New low noise closed-loop driving circuit for the micro-gyroscope

Full Differential CMOS Interface Circuit for Closed-Loop Capacitive Micro-Accelerometers

Closed-Loop Drive Circuit for the Micromachined Gyroscope Based on the Phase-Locked Technology

Noise analysis and characterization of a full differential CMOS interface circuit for capacitive closed-loop micro-accelerometer

A Low-Noise HV Interface Circuit for MEMS Vibratory Gyroscope

A Closed-Loop Self-Excited Drive Circuit for Quartz Gyroscope

A Temperature Characteristic Research and Compensation Design for Micro-Machined Gyroscope

CMOS Chip for Solid-State Tactile Force Sensor

The Research on the Dual Closed-Loop Driving Circuits for Micro-Machined Gyroscope

A Closed-Loop Sigma Delta Modulator For Micromechanical Capacitive Sensors

A Novel Closed-loop Drive Circuit for the Micromechined Gyroscope

Design and Application of a Metal Wet-Etching Post-Process for the Improvement of CMOS-MEMS Capacitive Sensors