Abstract:Cryogenic deep reactive ion etching (Cryo DRIE) of silicon has become an enticing but challenging process utilized in front-end fabrication for the semiconductor industry. This method, compared to the Bosch process, yields vertical etch profiles with smoother sidewalls not subjected to scalloping, which are desired for many microelectromechanical systems (MEMS) applications. Smoother sidewalls enhance electrical contact by ensuring more conformal and uniform sidewall coverage, thereby increasing the effective contact area without altering contact dimensions. The versatility of the Cryo DRIE process allows for customization of the etch profiles by adjusting key process parameters such as table temperature, O2 percentage of the total gas flow rate (O2 + SF6), RF bias power, and process pressure. In this work, we undertake a comprehensive study of the effects of Cryo DRIE process parameters on the trench profiles in the structures used to define cantilevers in MEMS devices. Experiments were performed with an Oxford PlasmaPro 100 Estrelas ICP-RIE system using positive photoresist SPR-955 as a mask material. Our findings demonstrate significant influences on the sidewall angle, etch rate, and trench shape due to these parameter modifications. Varying the table temperature between -80°C and -120°C under a constant process pressure of 10 mTorr changes the etch rate from 3 to 4 μm/min, while sidewall angle changes by ~2°, from positive ( 90° relative to the Si surface) tapering. Altering the O2 flow rate with constant SF6 flow results in a notable 10° shift in sidewall tapering. Furthermore, SPR-955 photoresist masks provide selectivity of 46:1 with respect to Si and facilitates the fabrication of MEMS devices with precise dimension control ranging from 1 to 100 μm for etching depths up to 42 μm using Cryo DRIE. Understanding the influence of each parameter is crucial for optimizing MEMS device fabrication.

Single wafer fabrication of a symmetric double-sided beam-mass structure using DRIE and wet etching by a novel vertical sidewall protection technique

(100) Composite Beam Structure Formed by Masked-Maskless Etch of Silicon

Bulk Micromachining Fabrication Platform Using the Integration of DRIE and Wet Anisotropic Etching

A single-mask dry-release process for fabrication of high aspect ratio SOI MEMS devices

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

A New Symmetrical Beam-Mass Structure for Accelerometers by Anisotropic Etching Without Convex Corner Compensation

Fabrication of hollow composite structure microfluidic double-end clamped beam

A Single Mask Dry Releasing Process for Making High Aspect Ratio Soimemsdevices.

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Composite Cantilever Beam-Mass Structure Gyroscope by A Novel Etching Technology

Fabrication of SOI MEMS Inertial Sensors with Dry Releasing Process

A molded surface-micromachining and bulk etching release (MOSBE) fabrication platform on (1 1 1) Si for MOEMS

A novel sandwich capacitive accelerometer with a symmetrical structure fabricated from a D-SOI wafer

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

Fabrication of a MEMS Capacitive Accelerometer with Symmetrical Double-Sided Serpentine Beam-Mass Structure

A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (1 0 0) silicon

Wafer level bulk titanium ICP etching using SU8 as an etching mask

Cryogenic DRIE Processes for High-Precision Silicon Etching in MEMS Applications

Study on maskless etching of silicon symmetric beam-mass structure in aqueous KOH

Hard Mask Free Drie Of Crystalline Si Nanobarrel With 6.7nm Wall Thickness And 50:1 Aspect Ratio

Double-sided Masking and Stress-Release Etching for the Fabrication of High-Aspect-ratio Graphene Micro-Cantilever