Abstract:This paper reports a novel MEMS accelerometer whose effective stiffness can be adjusted flexibly and even tuned to almost zero by using the electrostatic softening effect of two parallel plate capacitors: the comb-finger capacitor and the triangular capacitor. When applied to a biased voltage, the comb-finger capacitor provides a relatively large and nonlinear negative stiffness in the gap-varying direction, while the triangular capacitor produces a small yet linear negative stiffness in the area-varying direction. The proposed accelerometer is fabricated by using a standard silicon-on-glass manufacturing process and controlled by a customized digital circuit. An analytical model based on the pull-in dynamics as a result of the stiffness tuning is developed and simulated to investigate the dynamic behavior of the nonlinear accelerometer system. The proportion integral differential controller is utilized to improve the performance of the accelerometer while maintaining the stability of the closed-loop system operating with extremely low effective stiffness. The experimental results indicate that a two-fold increase of the sensitivity, a 30% reduction of Allan deviation bias instability, and a 20% reduction of Allan velocity random walk are achieved for the open-loop accelerometer system. A 75% decrease of the standard deviation bias instability and nearly two orders of magnitude improvement of the noise floor at 1 Hz for the closed-loop accelerometer system are realized when the effective stiffness is reduced to almost zero.

A New Symmetrical Beam-Mass Structure for Accelerometers by Anisotropic Etching Without Convex Corner Compensation

A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (1 0 0) silicon

A Novel Sandwich Capacitive Accelerometer with A Double-Sided 16-Beam-mass Structure

A Novel Capacitive Accelerometer with A Highly Symmetrical Double-Sided Beam-Mass Structure

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

A novel sandwich capacitive accelerometer with a symmetrical structure fabricated from a D-SOI wafer

A Novel Z-Axis Capacitance Accelerometer with Highly Symmetrical 16-Beam Structure

Fabrication of a MEMS Capacitive Accelerometer with Symmetrical Double-Sided Serpentine Beam-Mass Structure

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Stiffness-Tunable MEMS Accelerometer

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

A New Type of MEMS Accelerometer with Up-Tuning Structure

Design and Fabrication of a Highly Symmetrical Capacitive Triaxial Accelerometer

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

A Micromechanical Structure Eliminating Lateral Effect of Silicon Accelerometer

Design and Fabrication of a Mems Capacitive Accelerometer Based on Double-Device-layers SOI Wafer.

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers

A Highly Symmetrical Capacitive Accelerometer by Silicon Four-Layer Bonding