Abstract:A high-performance micromachined piezoresistive accelerometer, consisting of two axially stressed tiny beams combined with a central supporting cantilever, is developed for both much higher sensitivity and much broader bandwidth compared with conventional beam-mass piezoresistive accelerometers. With the pure axial-deformation scheme of the tiny beams, the developed accelerometer shows improvements in both sensitivity and resonant frequency. An analytic model is established for the pure axial-deformation condition of the tiny beams by adjusting the distance between the tiny beams and the central supporting cantilever. The specifications of the device, such as sensitivity and resonant frequency etc, are theoretically calculated. The analytic model is verified by using simulation of the finite element method (FEM), resulting in satisfactory agreement. Based on a figure of merit (the product of the sensitivity and the square of the resonant frequency), optimized design rules are obtained for the sensors of various measure-ranges from 0.25g to 25 000g. The accelerometers are fabricated by using silicon bulk micromachining technology. The formed 2.5g devices are characterized with a typical sensitivity of 106 mV/5 V/g and first mode resonant frequency of 1115 Hz. The testing results agree well with the design, thereby verifying the high performance of the proposed accelerometer. The developed sensors with the axially stressed tiny-beam scheme show obviously improved specifications, compared with previously published results.

A Novel Sandwich Capacitive Accelerometer with A Double-Sided 16-Beam-mass Structure

A Novel Capacitive Accelerometer with A Highly Symmetrical Double-Sided Beam-Mass Structure

A Novel Z-Axis Capacitance Accelerometer with Highly Symmetrical 16-Beam Structure

A novel sandwich capacitive accelerometer with a symmetrical structure fabricated from a D-SOI wafer

A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (1 0 0) silicon

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A New Symmetrical Beam-Mass Structure for Accelerometers by Anisotropic Etching Without Convex Corner Compensation

A novel sandwich differential capacitive accelerometer with symmetrical double-sided serpentine beam-mass structure

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

Z-Axis Capacitive Accelerometer With Novel Beams Using Sog Structure

Fabrication of a MEMS Capacitive Accelerometer with Symmetrical Double-Sided Serpentine Beam-Mass Structure

Design of a Novel Low Cross-Axis Sensitivity Micro-Gravity Sandwich Capacitance Accelerometer.

Design of Double T-Shape Accelerometer Based on Mems

Micromachined Tri-Axis Capacitive Accelerometer Based on the Single Mass

Design, Fabrication, and Characterization of a High-Performance Monolithic Triaxial Piezoresistive High-g Accelerometer

A MEMS Accelerometer with Double-Sided Symmetrical Folded-Beams on Single Wafer

Novel Capacitive Sensing System Design of A Microelectromechanical Systems Accelerometer for Gravity Measurement Applications

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

A Biaxial Capacitive Microaccelerometer with A Single Proof-Mass