Abstract:In this paper, double-clamped beam with a mass at the center has been fabricated on substrate of a Silicon-on-Insulator (SOI) wafer. Thin layer SOI Field-Effect Transistors (SOI-FETs) have been integrated at ends of the beam on top layer of the SOI wafer, which can be used for stress-sensing. Such a structure can be used as an accelerometer. The applied acceleration can be detected directly by the changing of the drain current. The measured sensitivity and noise floor of the device are 0.91 mV/g and 13 mg/Hz(-1/2). As expected performance of the SOI-FETs, such an accelerometer can be used in a wide temperature range (-60 degrees C to 200 degrees C) in some special applications, such as military, automobile, nuclear and well-logging industry application.Note to Practitioners-This paper describes the method for stress-sensing using the thin layer Silicon-on-Insulator Field-Effect Transistors (SOI-FETs). This method is characterized with adjustable sensitivity and wide working temperature range and is expected to apply in strain gauges, pressure sensors, accelerometers, and cantilever force/displacement sensors. In the paper we take the application in accelerometers for example. A structure of double-clamped beam with a mass at the center has been fabricated on the substrate of a SOI wafer. Based on the devices, we have measured the characteristics of the sensitivity, the noise floor and the working temperature, which is critical in some applications such as military, automobile, nuclear, and well-logging industry application.

A Micromechanical Structure Eliminating Lateral Effect of Silicon Accelerometer

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Thin Layer Soi-Fets Used for Stress-Sensing and Its Application in Accelerometers

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

Air damping of micromechanical silicon accelerometers

A micromachined silicon resonant accelerometer

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

High-Performance Single-Side Fabricated (111)-Silicon Dual-Cantilever Accelerometer with Squeeze-Film Air Damping Modulation

A Novel Sandwich Capacitive Accelerometer with A Double-Sided 16-Beam-mass Structure

A New Symmetrical Beam-Mass Structure for Accelerometers by Anisotropic Etching Without Convex Corner Compensation

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (1 0 0) silicon

Structural Design and Testing of a Micromechanical Resonant Accelerometer

A micromachined resonant accelerometer

A Novel Micro-Machined Out-of-Plane Resonant Accelerometer with Differential Structure of Different-Height Resonant Beams

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Micro-machined Resonant Out-of-plane Accelerometer with a Differential Structure Fabricated by Silicon-on-insulator–mems Technology

A Piezoresistive Accelerometer with a Novel Vertical Beam Structure