Abstract:A dual-axis in-plane resonant accelerometer based on aluminum nitride (AlN) has been developed, fabricated, and characterized. The performance of the constituent resonators in the resonant accelerometer has been fully assessed through its open and closed-loop responses, with detailed characterization results for one of the four resonators. The resonator features a low motional resistance (<inline-formula> <tex-math notation="LaTeX">${R}_{m}$ </tex-math></inline-formula>), eliminating the need for any board-level circuitry, unlike previous designs, while simply using a commercial lock-in amplifier with a phase lock loop (PLL) for oscillation. At an offset frequency of 1 kHz, the oscillator exhibits a phase noise of 100 dBc/Hz and an Allan deviation of subppm range. Acceleration of 1 g is induced by tilting the device by 90°, causing a corresponding frequency change in the beam resonator due to generated stress. All four resonators have been tested using a 45° step tilt to verify the results. At a frequency of 1.1 MHz, the accelerometer has an <inline-formula> <tex-math notation="LaTeX">${x}$ </tex-math></inline-formula>-axis sensitivity of 73 Hz/g (66 ppm/g) and a <inline-formula> <tex-math notation="LaTeX">${y}$ </tex-math></inline-formula>-axis sensitivity of 53 Hz/g (48 ppm/g), respectively, with a linear response exhibiting an <inline-formula> <tex-math notation="LaTeX">${R}^{{2}}$ </tex-math></inline-formula> value of 0.9995 and a minimum detectable angle of 0.67°. Despite using wider beams, the device’s sensitivity remains significant due to the use of a full substrate thickness for the proof mass and a slender resonator thickness of only <inline-formula> <tex-math notation="LaTeX">$3 \mu \text{m}$ </tex-math></inline-formula>.

A Novel Micro-Machined Out-of-Plane Resonant Accelerometer with Differential Structure of Different-Height Resonant Beams

Micro-machined Resonant Out-of-plane Accelerometer with a Differential Structure Fabricated by Silicon-on-insulator–mems Technology

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Design and Simulation of a Silicon Beam Resonant Accelerometer

Design and Analysis of a Novel Differential Si-Based Micro-Accelerometer Based on Resonant Fork

A micromachined resonant accelerometer

A Micro-Machined Differential Resonance Accelerometer Based on Silicon on Quartz Method

Microfabrication Technology for Non-Coplanar Resonant Beams and Crab-Leg Supporting Beams of Dual-Axis Bulk Micromachined Resonant Accelerometers.

A Novel Z-Axis Capacitance Accelerometer with Highly Symmetrical 16-Beam Structure

An Aluminum Nitride-Based Dual-Axis MEMS In-Plane Differential Resonant Accelerometer

Design of a new differential silicon resonant accelerometer with dual proofmasses using two-stage microlever

A Novel Biaxial Resonant Micro Accelerometer with Microleverage Mechanism

Design and Optimization of a Novel Resonant Accelerometer Resonator

Z-Axis Capacitive Accelerometer With Novel Beams Using Sog Structure

A Novel Sandwich Capacitive Accelerometer with A Double-Sided 16-Beam-mass Structure

A High-Performance Multi-Beam Microaccelerometer for Vibration Monitoring in Intelligent Manufacturing Equipment

A Novel Silicon Micromachined Resonant Accelerometer

A micromachined silicon resonant accelerometer

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Design and simulations of a new biaxial silicon resonant micro-accelerometer