Abstract:A high-performance micromachined piezoresistive accelerometer, consisting of two axially stressed tiny beams combined with a central supporting cantilever, is developed for both much higher sensitivity and much broader bandwidth compared with conventional beam-mass piezoresistive accelerometers. With the pure axial-deformation scheme of the tiny beams, the developed accelerometer shows improvements in both sensitivity and resonant frequency. An analytic model is established for the pure axial-deformation condition of the tiny beams by adjusting the distance between the tiny beams and the central supporting cantilever. The specifications of the device, such as sensitivity and resonant frequency etc, are theoretically calculated. The analytic model is verified by using simulation of the finite element method (FEM), resulting in satisfactory agreement. Based on a figure of merit (the product of the sensitivity and the square of the resonant frequency), optimized design rules are obtained for the sensors of various measure-ranges from 0.25g to 25 000g. The accelerometers are fabricated by using silicon bulk micromachining technology. The formed 2.5g devices are characterized with a typical sensitivity of 106 mV/5 V/g and first mode resonant frequency of 1115 Hz. The testing results agree well with the design, thereby verifying the high performance of the proposed accelerometer. The developed sensors with the axially stressed tiny-beam scheme show obviously improved specifications, compared with previously published results.

Design and Analysis of a Novel Differential Si-Based Micro-Accelerometer Based on Resonant Fork

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

A micromachined resonant accelerometer

A Compact Micromachined Interferometric Accelerometer Based on the Diffraction Grating

A Novel Micro-Machined Out-of-Plane Resonant Accelerometer with Differential Structure of Different-Height Resonant Beams

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Micro-machined Resonant Out-of-plane Accelerometer with a Differential Structure Fabricated by Silicon-on-insulator–mems Technology

Double Tuning-Fork Resonant Accelerometer

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

Bulk-Micromachined Silicon Resonant Accelerometer

Design and Analysis of a Multi-Finger Micromechanical Silicon Accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

A Highly Sensitive Biaxial Resonant Accelerometer with Two-Stage Microleverage Mechanisms

A MEMS Piezoelectric In-Plane Resonant Accelerometer Based on Aluminum Nitride with Two-Stage Microleverage Mechanism

Design Of A High-Sensitivity Micromechanical Resonant Accelerometer With A Two-Stage Microlever

A Novel Sandwich Capacitive Accelerometer with A Double-Sided 16-Beam-mass Structure

Critical Technologies in Design of Micromechanical Resonant Accelerometer

High-Performance Single-Side Fabricated (111)-Silicon Dual-Cantilever Accelerometer with Squeeze-Film Air Damping Modulation

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams