Abstract:According to the continuous development of metal-oxide semiconductor (MOS) fabrication technology, transistors have naturally become more radiation-tolerant through steadily decreasing gate-oxide thickness, increasing the tunneling probability between gate-oxide and channel. Unfortunately, despite this radiation-hardened property of developed transistors, the field of nuclear power plants (NPPs) requires even higher radiation hardness levels. Particularly, total ionizing dose (TID) of approximately 1 Mrad could be required for readout circuitry under severe accident conditions with 100 Mrad around a reactor in-core required. In harsh radiating environments such as NPPs, sensors such as micro-pocket-fission detectors (MPFD) would be a promising technology to be operated for detecting neutrons in reactor cores. For those sensors, readout circuits should be fundamentally placed close to sensing devices for minimizing signal interferences and white noise. Therefore, radiation hardening ability is necessary for the circuits under high radiation environments. This paper presents various integrated circuit designs for a radiation hardened charge-sensitive amplifier (CSA) by using SiGe 130 nm and Si 180 nm fabrication processes with different channel widths and transistor types of complementary metal-oxide-semiconductor (CMOS) and bipolar CMOS (BiCMOS). These circuits were tested under γ–ray environment with Cobalt-60 of high level activity: 490 kCi. The experiment results indicate amplitude degradation of 2.85%–34.3%, fall time increase of 201–1730 ns, as well as a signal-to-noise ratio (SNR) of 0.07–11.6 dB decrease with irradiation dose increase. These results can provide design guidelines for radiation hardening operational amplifiers in terms of transistor sizes and structures.

Radiation Hardened Read Circuit with High Reliability for SOI Based SONOS Memory

Novel High-Speed Radiation Hardened Sense Amplifier for SOI Based SONOS Memory

Design of SEU Tolerant Read Circuit for Non-Volatile Memories with high reliability

Radiation Hardened 12T SRAM with Crossbar-Based Peripheral Circuit in 28nm CMOS Technology

Total Dose Radiation Experiments In Cmos/Soi 4kb Sram

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

Characterization of LDO Induced Increment of SEE Sensitivity for 22-Nm FDSOI SRAM

Total Ionizing Radiation Effects of 2-T SONOS for 130 Nm/4 Mb NOR Flash Memory Technology

180Nm 4mb High Speed High Reliability Embedded SONOS Flash Memory

A PD-SOI Based DTI-LOCOS Combined Cross Isolation Technique for Minimizing TID Radiation Induced Leakage in High Density Memory

A Radiation-Hardened Programmable Read Only Memory for Space Applications.

High Speed Sense Amplifier Circuit for Low-Voltage SONOS Memory Systems

Reverse Programmed SONOS Memory Technique for 0.18 Μm Embedded Utilization

Characterization of Single Event Effect in a Radiation Hardened Programmable Read-Only Memory in a 130 nm Bulk CMOS Technology

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

Enhanced Readout Reliability in Phase Change Memory with a Dual-Sensing-Margin Offset-Compensated Sense Amplifier

A highly stable and low‐cost 12T radiation hardened SRAM cell design for aerospace application

Array and High Voltage Path Design for SONOS Flash Memory

Integrated Circuit Design for Radiation-Hardened Charge-Sensitive Amplifier Survived up to 2 Mrad

Radiation-Hardened 14T SRAM Bitcell with Speed and Power Optimized for Space Application

TID Characterization of 0.13&#x00b5;m SONOS Cell in 4mb NOR Flash Memory