Abstract:Solid oxide fuel cells (SOFCs) are considered the most efficient technology for the direct conversion of hydrocarbons to electrical energy. Although the commonly used Ni/YSZ cermet materials in SOFCs show excellent electrocatalytic properties in H 2 fuel, they suffer from carbon deposition problem when hydrocarbon fuels are used. In this work, we study the use of Ni 0 · 05 Ru 0.05 -Mo 2 C with a porous nanorod-shaped morphology as an internal reforming catalyst layer for methane-fueled SOFCs to solve the degradation of cell performance due to carbon deposition. The electrochemical performance and coking tolerance of two types of cells with and without the catalyst layer were systematically studied using methane and hydrogen as fuels. With the catalyst layer, the single cell using methane as fuel exhibits an improvement in peak power density by 24%, increasing from 297 to 367 mW cm −2 and there was no diffusion barrier for fuel gases within the cell. Furthermore, the cell can stably run for 100 h in methane at 700 °C. The improvement of electrochemical performance is attributed to the synergistic effect of Ni and Ru sites anchored on the porous Mo 2 C nanorods catalyst based on strong metal-support interactions, promoting the effective catalytic conversion of CH 4 to CO and H 2 . This study demonstrates that the integration of a catalyst layer for internal reforming is an effective strategy for the direct use of methane in SOFCs.

Experimental Investigation on Methane Steam Reforming Over a Ni/YSZ Anode of Planar Solid Oxide Fuel Cell

Performance and Effective Kinetic Models of Methane Steam Reforming over an Ni-YSZ Anode of Planar Solid Oxide Fuel Cell

Numerical investigation of the chemical and electrochemical characteristics of planar solid oxide fuel cell with direct internal reforming

Numerical study of thermoelectric characteristics of a planar solid oxide fuel cell with direct internal reforming of methane

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

In-situ Analysis of Anode Atmosphere in a Flat-Tube Solid Oxide Fuel Cell Operated with Dry Reforming of Methane

Methane steam reforming over Ni/YSZ cermet anode materials synthesized by different methods

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Influence of the Passage Diameter of an Inlet Pipe on the Direct Steam Reforming Performance of Inner Methane

Multi-Physics Modeling of Solid Oxide Fuel Cell Fueled by Methane and Analysis of Carbon Deposition

Thermodynamic and Experimental Assessment of Proton Conducting Solid Oxide Fuel Cells with Internal Methane Steam Reforming

Direct Operation of Solid Oxide Fuel Cells with Methane Fuel

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Mechanistic insight into catalytic conversion of methane on a Sr2Fe1.5Mo0.5O6−δ perovskite anode: a combined EIS-DRT, DFT and TPSR investigation

Modeling and evaluating of thermo-electro-chemo-mechanical behavior for pre-reformed methane-fueled solid oxide fuel cell

Ni and Ru bimetal nanoparticles-anchored porous Mo 2 C nanorods used as an internal reforming catalyst layer for hydrocarbon-fueled solid oxide fuel cells

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

Redox of Ni/YSZ Anodes and Oscillatory Behavior in Single-Chamber SOFC under Methane Oxidation Conditions

A review on anode on-cell catalyst reforming layer for direct methane solid oxide fuel cells

Comprehensive Investigation of Methane Conversion over Ni(111) Surface under a Consistent DFT Framework: Implications for Anti-Coking of SOFC Anodes

Effects of methane steam reforming on the mechanical stability of solid oxide fuel cell stack