Abstract:Direct utilization of methane in solid oxide fuel cells (SOFCs) is greatly impeded by the grievous carbon deposition and the much depressed catalytic activity. In this work, a promising anode, taking finger-like porous YSZ as the anode substrate and impregnated Ni0.08Co0.02Ce0.9O2−δ@Ni0.8Co0.2O as the novel catalyst, is fabricated via the phase conversion-combined tape-casting technique. This anode shows commendable mechanical strength and excellent catalytic activity and stability toward the methane conversion reactions, which is attributed to the exsolved alloy nanoparticles and the active oxygen species on the reduced Ni0.08Co0.02Ce0.9O2−δ catalyst as well as the facilitated methane transport rooting in the special open-pore microstructure of the anode substrate. Strikingly, this button cell delivers an excellent peak power density of 730 mW cm–2 at 800 °C in 97% CH4/3% H2O fuel, only 9% lower than that in 97% H2/3% H2O. Our work shed new light on the SOFC anode developments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17339?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17339</a>.Pore size distribution of the YSZ backbone, XRD results of NCCO and NCO, TPR profile of NCCO, XPS spectra of Ce 3d in NCCO and NC-CeO2–x, TEM results of NCCO and NC-CeO2–x, I–V–P plots, EIS and SEM results of button cells, and SVUV-PIMS results of methane conversions (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17339/suppl_file/am0c17339_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Methane steam reforming over Ni/YSZ cermet anode materials synthesized by different methods

Direct-methane solid oxide fuel cells with an <i>in situ</i> formed Ni-Fe alloy composite catalyst layer over Ni-YSZ anodes

Methane-fueled SOFC with Traditional Nickel-Based Anode by Applying Ni/Al2O3 As a Dual-Functional Layer

Methane Reforming with CO2 Using Nickel Catalysts Supported on Yttria-Doped SBA-15 Mesoporous Materials Via Sol–gel Process

Ni and Ru bimetal nanoparticles-anchored porous Mo 2 C nanorods used as an internal reforming catalyst layer for hydrocarbon-fueled solid oxide fuel cells

Enhanced Coking Resistance of Ni Cermet Anodes for Solid Oxide Fuel Cells Based on Methane On‐cell Reforming by a Redox‐stable Double‐perovskite Sr 2 MoFeO 6‐Δ

Infiltrated Ni 0.08 Co 0.02 CeO 2– x @Ni 0.8 Co 0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Rational Design of Superior, Coking-Resistant, Nickel-Based Anodes Through Tailoring Interfacial Reactions for Solid Oxide Fuel Cells Operated on Methane Fuel.

Anode supported SOFC fabricated with functional anode: role of variation of fuel and oxidants

Syngas Production from Methane Steam Reforming and Dry Reforming Reactions over Sintering-Resistant Ni@SiO2 Catalyst

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Cu–CeO2/YSZ electrodes for SOFCs: role of cermet meso/nanostructure in methane oxidation

Bimetallic NiFe Nanoparticles Supported on CeO2 as Catalysts for Methane Steam Reforming

A finger-like anode with infiltrated Ni0.1Ce0.9O2-δ catalyst using new phase inversion combined tape-casting technology for optimized dry reforming of methane

Reforming Of Methane And Coalbed Methane Over Nanocomposite Nni/Zro2.

Direct power generation from methanol by solid oxide fuel cells with a Cu-ceria based catalyst layer

Methane steam reforming for hydrogen production using low water-ratios without carbon formation over ceria coated Ni catalysts

Catalyst layer supported solid oxide fuel cells running on methane

CO2 Reforming with Methane Reaction over Ni@SiO2 Catalysts Coupled by Size Effect and Metal-Support Interaction

Methane dry reforming over activated carbon supported Ni-catalysts prepared by solid phase synthesis