Abstract:A suction-free interfacing method was developed for microchip electrophoresis hyphenated with inductively coupled plasma mass spectrometry (MCE-ICP-MS). The hyphenated system was composed of a microchip, a demountable capillary microflow nebulizer (d-CMN) combined with a heated single pass spray chamber, a negative pressure sampling device, a high voltage power supply, a syringe pump and an ICP-MS. To eliminate the nebulizer suction generated by the pneumatic nebulizer and to ensure that the makeup solution flowed into the nebulizer, two porous polymer plugs were fabricated in the microchip. As a result, reasonably true electropherograms were obtained when compared to the CE separation performed in the traditional MCE-ICP-MS mode without porous polymer plugs. Electrophoretic separation of I I- and IO3- was achieved within 25 s in a microchip with an effective separation length of only 15 mm at an electric field of 857 V cm(-1) using 10 mmol L-1 borate (pH 9.2) as the running buffer. A resolution of 1.3 was obtained and the absolute detection limits for I- and IO3- were 0.12 and 0.13 fg, respectively. The precisions (RSD, n = 10) of the migration time and peak height for I- and IO3- were in the range of 1.1-1.6% and 2.5-2.8%, respectively. Two table salt samples were analyzed by an external calibration method. The iodate contents were in accordance with their labeled values. The recoveries of I- and IO3- in the table salt samples were in the range

Investigation on micromachining technology compatibility of PECVD SiO 2/Si3N4 double-layer electrets

Study on PECVD SiO 2 /Si 3 N 4 double-layer electrets with different thicknesses

PECVD SiO2/Si3N4 Double-layer Electrets for Application in Micro-devices

Improvement of the Performance of the Pecvd Sio2/Si3n4 Double-Layer Electrets

Preparation and charge stability of SiO2/Si3N4 double layer electret used in micro electro mechanical system

Effects Of Different Si3n4 Thicknesses On The Performance Of Pecvd Sio2/Si3n4 Double Layers Electrets

PECVD SiO2/Si3N4 Double Layers Electrets on Glass Substrate

PECVD SiO2/Si3N4 DOUBLE LAYERS ELECTRETS FOR APPLICATION IN MEMS POWER GENERATOR

PECVD prepared Si2/Si3 N4 double layers electrets

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

Study on technology of zinc oxide piezoelectric thin film device with surface micromachining substrate

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Study of Polyimide As Sacrificial Layer with O-2 Plasma Releasing for Its Application in Mems Capacitive Fpa Fabrication

Application of PECVD SiC in glass micromachining

Polyimide sacrificial layer for micromachining

Improving the Environmental Stability of E-Beam Coatings by Employing a PIAD Capping Layer

Simulation and Experimental Verification of Silicon Dioxide Deposition by PECVD

The Study of Reactive Ion Etching of Heavily Doped Polysilicon Based on HBr/O2/He Plasmas for Thermopile Devices

Study on the application of silicide in surface micromachining

The Compatibility of Zno Piezoelectric Film with Micromachining Process

A new process for releasing micromechanical structures in surface micromachining with polysilicon support and LPCVD Si3N4 embedded mask