Abstract:Cryogenic deep reactive ion etching (Cryo DRIE) of silicon has become an enticing but challenging process utilized in front-end fabrication for the semiconductor industry. This method, compared to the Bosch process, yields vertical etch profiles with smoother sidewalls not subjected to scalloping, which are desired for many microelectromechanical systems (MEMS) applications. Smoother sidewalls enhance electrical contact by ensuring more conformal and uniform sidewall coverage, thereby increasing the effective contact area without altering contact dimensions. The versatility of the Cryo DRIE process allows for customization of the etch profiles by adjusting key process parameters such as table temperature, O2 percentage of the total gas flow rate (O2 + SF6), RF bias power, and process pressure. In this work, we undertake a comprehensive study of the effects of Cryo DRIE process parameters on the trench profiles in the structures used to define cantilevers in MEMS devices. Experiments were performed with an Oxford PlasmaPro 100 Estrelas ICP-RIE system using positive photoresist SPR-955 as a mask material. Our findings demonstrate significant influences on the sidewall angle, etch rate, and trench shape due to these parameter modifications. Varying the table temperature between -80°C and -120°C under a constant process pressure of 10 mTorr changes the etch rate from 3 to 4 μm/min, while sidewall angle changes by ~2°, from positive ( 90° relative to the Si surface) tapering. Altering the O2 flow rate with constant SF6 flow results in a notable 10° shift in sidewall tapering. Furthermore, SPR-955 photoresist masks provide selectivity of 46:1 with respect to Si and facilitates the fabrication of MEMS devices with precise dimension control ranging from 1 to 100 μm for etching depths up to 42 μm using Cryo DRIE. Understanding the influence of each parameter is crucial for optimizing MEMS device fabrication.

The Study of Reactive Ion Etching of Heavily Doped Polysilicon Based on HBr/O2/He Plasmas for Thermopile Devices

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Study of the Nanometer Scale Polysilicon Micro Structure Etching

Polysilicon gate etching in high density plasmas. V. Comparison between quantitative chemical analysis of photoresist and oxide masked polysilicon gates etched in HBr/Cl2/O2 plasmas

20 Nm Polysilicon Gate Patterning and Application in 36 Nm Complementary Metal–oxide–semiconductor Devices

Sub-damage-threshold plasma etching and profile tailoring of Si through laser-stimulated thermal desorption

Low-temperature plasma etching of high aspect-ratio densely packed 15 to sub-10 nm silicon features derived from PS-PDMS block copolymer patterns

Improvement on the Uniformity of Deep Reactive Ion Etch for Electrically Isolated Silicon-Based Substrates

Mechanisms for plasma etching of RRAM SiO2 with diblock copolymer selectivity

Cryogenic DRIE Processes for High-Precision Silicon Etching in MEMS Applications

Piezoresistive Properties of Heavily Doped P-type Polysilicon Films

Microscale pattern etch of 4H–SiC by inductively coupled plasma

I-V characterization study of porous silicon formation by doubled-cell electrochemical etching

Low-thermal-budget electrically active thick polysilicon for CMOS-First MEMS-last integration

Etching of high aspect ratio features in Si using SF6∕O2∕HBr and SF6∕O2∕Cl2 plasma

Tuning the Mechanical Properties of Poly-Silicon Film by Surface Modification Using Plasma Treatment

Study of Polyimide As Sacrificial Layer with O-2 Plasma Releasing for Its Application in Mems Capacitive Fpa Fabrication

Heavily Boron-Doped Silicon Layer for the Fabrication of Nanoscale Thermoelectric Devices

Research on Pt Nanoparticles-Assisted Chemical Etching of Heavily Doped p-Type Monocrystalline Silicon

Dry etching of polydimethylsiloxane used for bio-microfluidic systems

Preparation and Etching of Silicon-Based Piezoelectric Thin Films for Integrated Devices