Abstract:The aim of the present paper is to review our work on plasma‐surface interactions during the etching of silicon gates in low pressure high density HBr/Cl2/O2 based plasmas. In integrated circuit manufacturing, the transfer of patterns onto the polysilicon layer relies on the formation of a passivation layer on sidewalls of the etched features, which protects the silicon gate sidewall fromisotropic etching. At the same time, a layer with an almost identical chemical composition is also deposited on the reactor walls and can modify the process parameters by changing the radicals' surface loss probability. In this work we use a new “plasma etching‐sputtering” diagnostic technique, involving a subsequent “mild etching” of the layer deposited on the chamber walls by a few % SF6‐containing Ar plasma. Thus we investigate the chemical composition of this layer. This chemical composition is deduced from the time variation of the gas phase concentration of different atoms and radicals, the etch products of the wall deposited layer, monitored during the “mild etching” of the layer by time‐resolved optical emission spectroscopy and mass spectrometry. Optical absorption spectroscopy and mass spectrometry have been employed to characterize the HBr/Cl2/O2 plasma, currently used for the gate etching, and to estimate the absolute flux of neutral and ionic deposition precursors reaching the reactor walls. It comes out that the silicon wafer etch byproducts, SiClx radicals (x < 2) and SiOyCl+x ions, are the main depositing agents. Finally, the chemical topography analysis method, based on the X‐ray photoelectron spectroscopy, has been used to determine the chemical composition of the layer formed on the sidewalls of the silicon etched features. We show that the layers deposited on the sidewalls and on the chamber walls are both silicon oxyhalogenides (SiOyClx) compounds, formed by the subsequent oxidation of the deposited silicon chloride etching by‐products. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

Study of the Nanometer Scale Polysilicon Micro Structure Etching

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Optimization of Polysilicon Gate Etching Process in SONOS Memory Fabrication

20 Nm Polysilicon Gate Patterning and Application in 36 Nm Complementary Metal–oxide–semiconductor Devices

Low-temperature plasma etching of high aspect-ratio densely packed 15 to sub-10 nm silicon features derived from PS-PDMS block copolymer patterns

Dry etching of polydimethylsiloxane used for bio-microfluidic systems

A process study of electron beam nano-lithography and deep etching with an ICP system

Effects of deep reactive ion etching parameters on etching rate and surface morphology in extremely deep silicon etch process with high aspect ratio

The Study of Reactive Ion Etching of Heavily Doped Polysilicon Based on HBr/O2/He Plasmas for Thermopile Devices

Size-controllable fabrication of nano-to-microstructures on silicon surface using high-density ion etching with pulsed bias

Correlation and Interaction between Sidewall Passivation and Chamber Walls Deposition During Silicon Gate Etching

Optimization of Metal-Assisted Etchant Components for Fabrication of Porous Silicon

Polysilicon gate etching in high density plasmas. V. Comparison between quantitative chemical analysis of photoresist and oxide masked polysilicon gates etched in HBr/Cl2/O2 plasmas

Etching of high aspect ratio features in Si using SF6∕O2∕HBr and SF6∕O2∕Cl2 plasma

Inductively Coupled Plasma etching of amorphous silicon nanostructures over nanotopography using C4F8/SF6 chemistry

Wet Etch Rate Behavior of Poly-Si in TMAH Solution at Various Ambient Gas Conditions

Effect of tetramethylammonium hydroxide/isopropyl alcohol wet etching on geometry and surface roughness of silicon nanowires fabricated by AFM lithography

Exploring the Influence of Solvents on Electrochemically Etched Porous Silicon Based on Photoluminescence and Surface Morphology Analysis

Wafer-Scale Fabrication of Ultra-High Aspect Ratio, Microscale Silicon Structures with Smooth Sidewalls Using Metal Assisted Chemical Etching

Effect of process parameters on sidewall damage in deep silicon etch

Effect of Isopropyl Alcohol Concentration and Etching Time on Wet Chemical Anisotropic Etching of Low-Resistivity Crystalline Silicon Wafer