Abstract:Ba(Ce0.8−xSnx)Y0.2O3−σ (x=0, 0.05, 0.10, 0.15, 0.20, 0.25) powders were prepared by solid state reaction method. The powder samples with Sn element still keep pervoskite-type configuration after boiling in water for 3h while the BaCe0.8Y0.2O3−σ powders apparently decompose into amorphous phases, which indicates the oxides doped with Sn exhibit good chemical stability. Thermal gravity analysis indicates the compounds with Sn possess better chemical stability in CO2 compared with BaCe0.8Y0.2O3−σ. The BaCe0.7Sn0.1Y0.2O3−σ sample displays a conductivity of 0.007S/cm at 700°C in wet hydrogen. Although the relative density of BaCe0.8Y0.2O3−σ only reaches 88.3% after sintering at 1400°C, the Ba(Ce0.8−xSnx)Y0.2O3−σ samples exhibit relative densities as high as 96.0%. A fuel cell with BaCe0.7Sn0.1Y0.2O3−σ electrolyte was prepared by a suspension spray combining with in situ sintering method and tested in humid hydrogen. Its output and interface resistance are 470mW/cm2 and 0.13Ωcm2 at 700°C, respectively. The short-term performance test also indicates it has good stability as well as desirable compatibility between electrolyte and electrodes.

A Novel Anode Supported BaCe0.7Ta0.1Y0.2O3−δ Electrolyte Membrane for Proton-Conducting Solid Oxide Fuel Cell

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

Influence of anode pore forming additives on the densification of supported BaCe0.7Ta0.1Y0.2O3-δ electrolyte membranes based on a solid state reaction

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

A novel single phase cathode material for a proton-conducting SOFC

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

A Novel PrBaCo2O5+σ-BaZr0.1Ce0.7Y0.1Yb0.1O3 Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

A stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells

In Situ Fabrication of a Supported Ba3Ca1.18Nb1.82O9−δ Membrane Electrolyte for a Proton‐Conducting SOFC

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

High Performance La0.5(Ba0.2Sr0.2Ca0.1)Co0.8Fe0.2O3-δ- BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Stable, Easily Sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Electrolyte-Based Proton-Conducting Solid Oxide Fuel Cells by Gel-Casting and Suspension Spray

Novel cobalt-free cathode materials BaCexFe1-xO3-δ for proton-conducting solid oxide fuel cells

A Performance Study of Solid Oxide Fuel Cells with BaZr0.1Ce0.7Y0.2O3–δ Electrolyte Developed by Spray‐Modified Pressing Method

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode