Abstract:Perovskite-type proton-conducting materials, such as BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb), are very attractive for the next-generation equipment of electrochemical energy conversion and storage owing to their excellent conductivity in the intermediate-temperature range (300-750 °C), as well as good thermo-chemical stability, coking resistance, and sulfur tolerance. However, the lack of a reliable and cost-effective synthesis method for such multi-component co-doping oxides limits their large-scale application. In this study, for the first time, we successfully synthesize BCZYYb electrolyte nanopowders by using a rapid, scalable flame-based gas-phase synthesis method with two different barium precursors Ba(NO3)2 and Ba(CH3COO)2, named as BCZYYb (N) and BCZYYb (CA). The as-synthesized nanoparticles exhibit good crystallinity of the pure orthorhombic perovskite BCZYYb phase. BCZYYb (CA) shows more uniform doping with the element ratio of 1:0.74:0.12:0.08:0.1, which is very close to the theoretical value. The shrinkage and surface SEM (scanning electron microscope) results indicate that the flame-made powders have superior sinterability compared to the sol-gel-made powders because of the smaller primary particle size (∼20 nm). Electrochemical impedance spectroscopy tests show that BCZYYb (CA) sintered at 1450 °C has the highest protonic conductivity of 1.31 × 10-2 S cm-1 in wet H2 when operating at 600 °C and still maintains a high-level conductivity of 1.19 × 10-2 S cm-1 even when the sintering temperature is reduced to 1350 °C, which is mainly attributed to uniform doping and good sinterability. The activation energy for the conductivity of BCZYYb (CA) is also significantly lower than that of conventional electrolytes, which suggests much better conductivity in the intermediate (∼600 °C) and even lower operating temperature. The excellent conductivity performance combined with the high-throughput production capability makes the swirling spray flame a promising synthesis method for promoting the BCZYYb electrolytes from lab to industrial-scale solid oxide fuel cells.

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

The Chemical Stability and Conductivity of BaCe0.9−xYxNb0.1O3−σ Proton-Conductive Electrolyte for SOFC

A new stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells

A New Stable BaCeO3‐Based Proton Conductor for Intermediate‐Temperature Solid Oxide Fuel Cells.

Samarium and Yttrium Codoped BaCeO3 Proton Conductor with Improved Sinterability and Higher Electrical Conductivity

Synthesis And Characterization Of Bazr0.3ce0.5y0.2-Xybxo3-Delta Proton Conductor For Solid Oxide Fuel Cells

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte

Enhancing the sinterability and electrical properties of BaZr<sub>0.1</sub>Ce<sub>0.7</sub>Y<sub>0.2</sub>O<sub>3-</sub>proton-c onducting ceramic electrolyte

Conductivity of Bi-Doped Ba0.6Sr0.4CeO3 Electrolyte Materials

Rapid Gas-Phase Synthesis of the Perovskite-Type BaCe0.7Zr0.1Y0.1Yb0.1O3-δ Proton-Conducting Nanocrystalline Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells

BaZr0.1Ce0.7Y0.2O3−δ Proton-Conducting Electrolyte Prepared by Gel-Casting for Low-Temperature Solid Oxide Fuel Cells

Performance of BaCe0.8Y0.2O3-δ Proton Electrolyte Materials for Solid Oxide Fuel Cells by Compositing the Transition Metal Oxide NiO

Influence of rare-earth doping on the phase composition, sinterability, chemical stability and conductivity of BaHf0.8Ln0.2O3-δ (Ln = Yb, Y, Dy, Gd) proton conductors

Ce0.8sm0.2o1.9 Decorated with Electron-Blocking Acceptor-Doped Baceo3 As Electrolyte for Low-Temperature Solid Oxide Fuel Cells

Preparation, characterization and application of BaZr0.1Ce0.7Y0.2O3-δ for a high-performance and stable proton ceramic electrochemical cell

New Understanding and Improvement in Sintering Behavior of Cerium‐Rich Perovskite‐Type Protonic Electrolytes

Chemically Stable Yttrium and Tin Co‐Doped Barium Zirconate Electrolyte for Next Generation High Performance Proton‐Conducting Solid Oxide Fuel Cells

SrCe0.9Sm0.1O3-α Compounded with NaCl-KCl As a Composite Electrolyte for Intermediate Temperature Fuel Cell