Abstract:Sintering aids are commonly used to improve the sinterability of proton-conducting oxides, whereas the sintering aid elements are being used alone in previous research. In this study, a high-entropy design method for the BaCe 0.4 Zr 0.4 Y 0.2 O 3 (BCZY) proton-conducting oxides sintering aid is proposed. In contrast to the use of sintering aids such as Ni, Fe, Cu, Co, and Zn alone, the high-entropy design allows for the simultaneous use of all five elements, resulting in the new composition BaCe 0.4 Zr 0.4 Y 0.15 Ni 0.01 Cu 0.01 Co 0.01 Fe 0.01 Zn 0.01 O 3 (HE-BCZY). Compared to conventional BaCe 0.4 Zr 0.4 Y 0.15 M 0.05 O 3 (BCZYM, M = Ni, Cu, Co, Fe, Zn) materials, the sinterability of the new HE-BCZY material is significantly greater than that of BCZYM, despite the fact that the concentration of sintering aids is the same. Following sintering at 1300 °C, the HE-BCZY electrolyte membrane is completely dense. In addition, the HE-BCZY electrolyte has a higher conductivity than BCZYM. The low sintering temperature allows the successful preparation of proton ceramic fuel cells (PCFCs) with the HE-BCZY electrolyte, and the fuel cell reaches a high peak power density of 1218 mW cm −2 at 700 °C, which is much higher than that of PCFCs using BCZY-based electrolytes. In addition, the excellent chemical stability of HE-BCZY is maintained under both H 2 O and CO 2 conditions. Consequently, a fuel cell employing the HE-BCZY electrolyte operates without detectable degradation for 200 h. This study demonstrates that although the high-entropy design is seldom used for sintering aids of proton-conducting oxides, it is an intriguing and promising strategy for creating high-performance electrolyte materials with good sinterability, high conductivity, and excellent stability.

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte

Enhancing the sinterability and electrical properties of BaZr<sub>0.1</sub>Ce<sub>0.7</sub>Y<sub>0.2</sub>O<sub>3-</sub>proton-c onducting ceramic electrolyte

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Effect of Two Different ZnO Addition Strategies on the Sinterability and Conductivity of the BaZr0.4Ce0.4Y0.2O3−δ Proton-Conducting Ceramic Electrolyte

Influence of Triple Sintering Additives (Bao-Cuo-b2o3) on the Sintering Behavior and Conductivity of the Proton-Conducting BaZr0.1Ce0.7Y0.2O3−δ Electrolyte Sintered at 1150 °C

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells

Preparation, characterization and application of BaZr0.1Ce0.7Y0.2O3-δ for a high-performance and stable proton ceramic electrochemical cell

Manipulating Cation Nonstoichiometry Towards Developing Better Electrolyte for Self-Humidified Dual-Ion Solid Oxide Fuel Cells

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Designing High Interfacial Conduction Beyond Bulk Via Engineering the Semiconductor–Ionic Heterostructure CeO2−δ/BaZr0.8Y0.2O3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications

Sintering behavior of BaCe<sub>0.7</sub>Zr<sub>0.1</sub>Y<sub>0.2</sub>O<sub>3-</sub> electrolyte at 1150 C with the utilization of CuO and Bi<sub>2</sub>O<sub>3</sub> as sintering aids and its electrical performance

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Enhanced Sintering Ability and Electrochemical Performance of Gd0.1Ce0.9O1.95 Composited with (dy0.2zr0.05bi0.75)2o3 for Low-Temperature Solid Oxide Fuel Cells

High-entropy design in sintering aids for proton-conducting electrolytes of solid oxide fuel cells

Effect of NiO Addition on the Sintering and Electrochemical Properties of BaCe0.55Zr0.35Y0.1O3-δ Proton-Conducting Ceramic Electrolyte

Towards Highly Dense Electrolytes at Lower Sintering Temperature (∼1200 °C): Optimization Strategies for BaCe0.7Zr0.1CuxY0.2-xO3-δ in SOFCs

BaZr0.1Ce0.7Y0.2O3−δ Proton-Conducting Electrolyte Prepared by Gel-Casting for Low-Temperature Solid Oxide Fuel Cells

A New Composite Proton Conductor As a High-Performance Electrolyte Toward Low-Temperature Protonic Ceramic Cells