Abstract:Perovskite-type proton-conducting materials, such as BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb), are very attractive for the next-generation equipment of electrochemical energy conversion and storage owing to their excellent conductivity in the intermediate-temperature range (300-750 °C), as well as good thermo-chemical stability, coking resistance, and sulfur tolerance. However, the lack of a reliable and cost-effective synthesis method for such multi-component co-doping oxides limits their large-scale application. In this study, for the first time, we successfully synthesize BCZYYb electrolyte nanopowders by using a rapid, scalable flame-based gas-phase synthesis method with two different barium precursors Ba(NO3)2 and Ba(CH3COO)2, named as BCZYYb (N) and BCZYYb (CA). The as-synthesized nanoparticles exhibit good crystallinity of the pure orthorhombic perovskite BCZYYb phase. BCZYYb (CA) shows more uniform doping with the element ratio of 1:0.74:0.12:0.08:0.1, which is very close to the theoretical value. The shrinkage and surface SEM (scanning electron microscope) results indicate that the flame-made powders have superior sinterability compared to the sol-gel-made powders because of the smaller primary particle size (∼20 nm). Electrochemical impedance spectroscopy tests show that BCZYYb (CA) sintered at 1450 °C has the highest protonic conductivity of 1.31 × 10-2 S cm-1 in wet H2 when operating at 600 °C and still maintains a high-level conductivity of 1.19 × 10-2 S cm-1 even when the sintering temperature is reduced to 1350 °C, which is mainly attributed to uniform doping and good sinterability. The activation energy for the conductivity of BCZYYb (CA) is also significantly lower than that of conventional electrolytes, which suggests much better conductivity in the intermediate (∼600 °C) and even lower operating temperature. The excellent conductivity performance combined with the high-throughput production capability makes the swirling spray flame a promising synthesis method for promoting the BCZYYb electrolytes from lab to industrial-scale solid oxide fuel cells.

BaZr0.1Ce0.7Y0.2O3−δ Proton-Conducting Electrolyte Prepared by Gel-Casting for Low-Temperature Solid Oxide Fuel Cells

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Rapid Gas-Phase Synthesis of the Perovskite-Type BaCe0.7Zr0.1Y0.1Yb0.1O3-δ Proton-Conducting Nanocrystalline Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells

Proton-Conducting Solid Oxide Fuel Cells with Yttrium-Doped Barium Zirconate Electrolyte Films Sintered at Reduced Temperatures

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells

Synthesis And Characterization Of Bazr0.3ce0.5y0.2-Xybxo3-Delta Proton Conductor For Solid Oxide Fuel Cells

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

Chemically Stable Yttrium and Tin Co‐Doped Barium Zirconate Electrolyte for Next Generation High Performance Proton‐Conducting Solid Oxide Fuel Cells

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte

Co-precipitation process as an effective and viable route for proton-conducting solid oxide fuel cell applications

A Novel Layered Perovskite Cathode for Proton Conducting Solid Oxide Fuel Cells

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells