Abstract:Sintering aids are commonly used to improve the sinterability of proton-conducting oxides, whereas the sintering aid elements are being used alone in previous research. In this study, a high-entropy design method for the BaCe 0.4 Zr 0.4 Y 0.2 O 3 (BCZY) proton-conducting oxides sintering aid is proposed. In contrast to the use of sintering aids such as Ni, Fe, Cu, Co, and Zn alone, the high-entropy design allows for the simultaneous use of all five elements, resulting in the new composition BaCe 0.4 Zr 0.4 Y 0.15 Ni 0.01 Cu 0.01 Co 0.01 Fe 0.01 Zn 0.01 O 3 (HE-BCZY). Compared to conventional BaCe 0.4 Zr 0.4 Y 0.15 M 0.05 O 3 (BCZYM, M = Ni, Cu, Co, Fe, Zn) materials, the sinterability of the new HE-BCZY material is significantly greater than that of BCZYM, despite the fact that the concentration of sintering aids is the same. Following sintering at 1300 °C, the HE-BCZY electrolyte membrane is completely dense. In addition, the HE-BCZY electrolyte has a higher conductivity than BCZYM. The low sintering temperature allows the successful preparation of proton ceramic fuel cells (PCFCs) with the HE-BCZY electrolyte, and the fuel cell reaches a high peak power density of 1218 mW cm −2 at 700 °C, which is much higher than that of PCFCs using BCZY-based electrolytes. In addition, the excellent chemical stability of HE-BCZY is maintained under both H 2 O and CO 2 conditions. Consequently, a fuel cell employing the HE-BCZY electrolyte operates without detectable degradation for 200 h. This study demonstrates that although the high-entropy design is seldom used for sintering aids of proton-conducting oxides, it is an intriguing and promising strategy for creating high-performance electrolyte materials with good sinterability, high conductivity, and excellent stability.

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Low-temperature protonic ceramic membrane fuel cells (PCMFCs) with SrCo0.9Sb0.1O3-δ cubic perovskite cathode

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

High Performance Protonic Ceramic Membrane Fuel Cells (pcmfcs) with Sm0.5Sr0.5CoO3−δ Perovskite Cathode

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

A Novel Layered Perovskite Cathode for Proton Conducting Solid Oxide Fuel Cells

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Layered Perovskite LaBaCuMO5+x (M = Fe, Co) Cathodes for Intermediate-Temperature Protonic Ceramic Membrane Fuel Cells

Electrochemical Performance and Enhancement of Hydration Kinetics on BaCo 0.7 Fe 0.2 Zr 0.1 O 3−δ Cathode for Protonic Ceramic Fuel Cells

Repeatable preparation of defect-free electrolyte membranes for proton-conducting fuel cells

Design of efficient and durable symmetrical protonic ceramic fuel cells at intermediate temperatures via B-site doping of Ni in BaCe0.56Zr0.2Ni0.04Y0.2O3–δ

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Probing oxygen reduction and water uptake kinetics of BaCo0.4Fe0.4Zr0.1Y0.1-xZnxO3-δ cathodes for protonic ceramic fuel cells

Ba0.9Co0.7Fe0.2Nb0.1O3-δ perovskite as promising cathode material for proton ceramic fuel cell

Improved mechanical strength, proton conductivity and power density in an ‘all-protonic’ ceramic fuel cell at intermediate temperature

Prontonic ceramic membrane fuel cells with layered GdBaCo2O5+x cathode prepared by gel-casting and suspension spray

Co-precipitation process as an effective and viable route for proton-conducting solid oxide fuel cell applications

High-entropy design in sintering aids for proton-conducting electrolytes of solid oxide fuel cells