Abstract:Proton-conducting ceramic cells are promising devices for high-efficient energy conversion, while the preparation of defect-free electrolyte membranes is difficult and blocks their quick development. Here, a vacuum-assistant dip-coating method is developed to prepare defect-free BaCe0.4Zr0.4Y0.1Yb0.1O3-δ (BCZYYb4411) proton-conducting electrolyte membranes on porous anode (40 wt%BCZYYb4411 - 60 wt%NiO) substrates. Unlike the conventional dip-coating process, by using the vacuum-assistant dip-coating method, defects (like running through pinholes, cracks) that would cause gas leakage, short-circuit and low open-circuit voltage (OCV) in following electrochemical tests can be eliminated. By tuning the mass concentration of electrolyte powders in the coating slurry, thin electrolyte membranes with different thicknesses can be reproducibly prepared. Proton-conducting fuel cells (PCFCs) with BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY0.1) cathode show high OCV values closing to the theoretical value of 1.13 V at 600 °C, demonstrating that dense and defect-free electrolyte membranes are fabricated. The as-prepared PCFC with a 10-μm-thickness defect-free electrolyte membrane shows a high peak power density reaching up to 761 mW cm−2 at 650 °C and stability of more than 250 h at the current density of 200 mA cm−2 at 600 °C. All these results illustrate that the developed method is feasible to prepare dense and thin electrolyte membranes without defects for proton-conducting ceramic cells.

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Low-temperature protonic ceramic membrane fuel cells (PCMFCs) with SrCo0.9Sb0.1O3-δ cubic perovskite cathode

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Prontonic ceramic membrane fuel cells with layered GdBaCo2O5+x cathode prepared by gel-casting and suspension spray

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

Layered Perovskite LaBaCuMO5+x (M = Fe, Co) Cathodes for Intermediate-Temperature Protonic Ceramic Membrane Fuel Cells

Stable proton-conducting Ca-doped LaNbO4 thin electrolyte-based protonic ceramic membrane fuel cells by in situ screen printing

High Performance Protonic Ceramic Membrane Fuel Cells (pcmfcs) with Sm0.5Sr0.5CoO3−δ Perovskite Cathode

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

A Novel Layered Perovskite Cathode for Proton Conducting Solid Oxide Fuel Cells

Repeatable preparation of defect-free electrolyte membranes for proton-conducting fuel cells

Reactive Magnetron Sputtering for Y-Doped Barium Zirconate Electrolyte Deposition in a Complete Protonic Ceramic Fuel Cell

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Electrochemical Performance and Enhancement of Hydration Kinetics on BaCo 0.7 Fe 0.2 Zr 0.1 O 3−δ Cathode for Protonic Ceramic Fuel Cells

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Enhanced Electrochemical Performance of a Ba 0.5 Sr 0.5 Co 0.7 Fe 0.2 Ni 0.1 O 3−δ –BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ Composite Oxygen Electrode for Protonic Ceramic Electrochemical Cells

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

An interesting application-oriented design of high-strength anode support for protonic ceramic fuel cells by a non-proton-conducting cermet

Enhanced Electrochemical Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Cathode by Zr4+, Sm3+ and Yb3+ Tri-Doped BaCeO3 Compositing for Intermediate-Temperature Thin-Film Fuel Cells