Abstract:BaCe0.5Zr0.3Y0.2O3–δ (BCZY), regarded as one of the most promising proton–conducting electrolytes, often experiences difficulty because of its high sintering temperature. Here, a B–site doped BaCe0.56Zr0.2Ni0.04Y0.2O3–δ (BCZNY) electrolytes were fabricated to address this drawback. The impact of Ni addition on sintering and electrical properties was examined. By adding Ni to the B–site of BCZY, a substantial decrease in the sintering temperature was achieved, i.e., from 1600 °C (for BCZY) to 1300 °C (for BCZNY). A conductivity of 0.05 S cm−1 at 700 °C was observed for BCZNY electrolyte in a moist nitrogen environment. In addition, SrFe0.8Mo0.2O3–δ (SFM) is utilized as a symmetrical electrode material due to its high ionic and electronic conductivity. SFM electrode was synthesized via combustion process and exhibited suitable chemical and thermal compatibility with BCZY and BCZNY electrolytes up to 1100 °C. A single–phase cubic structure along with the surface morphology of electrolyte–supported symmetrical cells was confirmed by X–ray diffraction and scanning electron microscopy. Electrochemical impedance spectroscopy was conducted to identify the area–specific polarization resistance (ASR). The lowest ASR values of 0.037, 0.081, and 0.327 Ω cm2 at 800, 700, and 600 °C in humidified hydrogen were obtained in SFM-BCZNY composite electrode. The symmetrical cell achieved a peak power density of 254 m W cm−2 (cell configuration; SFM-BCZNY | BCZNY | SFM-BCZNY) at 800 °C. The fuel cell devices showed long–term stability of the fuel cell device for 100 h at 700 °C under a current of 120 mA cm−2. Considering the presented results, the as-prepared BCZNY is a promising protonic electrolyte for IT-SOFCs.

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Low-temperature protonic ceramic membrane fuel cells (PCMFCs) with SrCo0.9Sb0.1O3-δ cubic perovskite cathode

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Layered Perovskite LaBaCuMO5+x (M = Fe, Co) Cathodes for Intermediate-Temperature Protonic Ceramic Membrane Fuel Cells

A Novel Layered Perovskite Cathode for Proton Conducting Solid Oxide Fuel Cells

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

High Performance Protonic Ceramic Membrane Fuel Cells (pcmfcs) with Sm0.5Sr0.5CoO3−δ Perovskite Cathode

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Electrochemical Performance and Enhancement of Hydration Kinetics on BaCo 0.7 Fe 0.2 Zr 0.1 O 3−δ Cathode for Protonic Ceramic Fuel Cells

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Prontonic ceramic membrane fuel cells with layered GdBaCo2O5+x cathode prepared by gel-casting and suspension spray

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Enhanced Electrochemical Performance of a Ba 0.5 Sr 0.5 Co 0.7 Fe 0.2 Ni 0.1 O 3−δ –BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ Composite Oxygen Electrode for Protonic Ceramic Electrochemical Cells

A high performance BaZr0.1Ce0.7Y0.2O3-δ-based solid oxide fuel cell with a cobalt-free Ba0.5Sr0.5FeO3-δ–Ce0.8Sm0.2O2-δ composite cathode

Design of efficient and durable symmetrical protonic ceramic fuel cells at intermediate temperatures via B-site doping of Ni in BaCe0.56Zr0.2Ni0.04Y0.2O3–δ

Ba0.9Co0.7Fe0.2Nb0.1O3-δ perovskite as promising cathode material for proton ceramic fuel cell

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

Fluorine Anion-Doped Ba0.6Sr0.4Co0.7Fe0.2Nb0.1O3-δ as a Promising Cathode for Protonic Ceramic Fuel Cells

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode