Abstract:Scalable and facile fabrication of large-area electrolytes by physical vapor deposition (PVD) for efficient and durable solid oxide fuel cells (SOFCs) is a promising way to tackle the issues such as elemental diffusion and warpage of cells resulted from high-temperature sintering in conventional wet ceramic methods. Herein, high-performance industrial size, 12 × 12 cm 2 , electrolytes are successfully fabricated by reactive sputtering on commercially obtained nickel oxide-yttria-stabilized zirconia (NiO-YSZ) anode without any pretreatment. Electrolytes of 6-μm-thick with gadolinium-doped ceria (GDC)|YSZ|GDC tri-layer configuration are fabricated with less than 2.5-h sputtering and followed by annealing at 1000 °C, much lower than that adopted in traditional wet process. In combination with traditional La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) cathodes, SOFCs with sputtered electrolytes show open circuit voltages close to the theoretical values, excellent electrochemical performances and long-term stability. The initial peak power densities of such cells reach 1.80, 1.24, 0.75 and 0.42 W cm −2 at 800, 750, 700 and 650 °C, respectively. The performance increases slightly in the initial stage and then stabilizes without degradation during the 300-h stability test under a constant voltage of 0.8 V at 650 °C. The scaled-up deposition area and the high deposition rate (∼2.5 μm h −1 ) show promising opportunities in the mass production of SOFCs using reactive sputtering.

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Bilayered BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ /Ce 0.8 Sm 0.2 O 2-δ electrolyte membranes for solid oxide fuel cells with high open circuit voltages

Fabrication and Performance of BaCe0.8Y0.2O3−δ–BaZr0.8Y0.2O3−δ Bilayer Electrolyte for Anode-Supported Solid Oxide Fuel Cells

Chemically Stable BaZr0.7Pr0.1Y0.2O3-δ-BaCe0.8Y0.2O3-δ Bilayer Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

High performance of anode supported BaZr0.1Ce0.7Y0.2O3−δ(BZCY) electrolyte cell for IT-SOFC

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Solid oxide fuel cell with a spin-coated yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolyte

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

In-situ Formed Ce0.8Sm0.2O2−δ@Ba(Ce, Zr)1−x(Sm, Y)xO3−δ Core/shell Electron-Blocking Layer Towards Ce0.8Sm0.2O2−δ-based Solid Oxide Fuel Cells with High Open Circuit Voltages

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Fabrication of an Anode-Supported Yttria-Stabilized Zirconia Thin Film for Solid-Oxide Fuel Cells Via Wet Powder Spraying

Scalable and facile fabrication of tri-layer electrolytes by reactive sputtering for efficient and durable solid oxide fuel cells

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Fabrication and Characterization of Anode-Supported Dense BaZr0.8Y0.2O3 − Δ Electrolyte Membranes by a Dip-Coating Process