Abstract:Dual-ion (oxygen ion and proton) conducting electrolyte BaZr0.1Ce0.7Y0.1Yb0.1O3-delta (BZCYYb) is one of the most commonly used electrolyte materials for proton conducting fuel cells (PCFCs). Here, we improve conducting property and performance of BZCYYb electrolyte through simply introducing B-site cation deficiency. Dual-ion conductivities for Ba(Zr0.1Ce0.7Y0.1Yb0.1)(0.95)O3-delta (BZCYYb-0.95) electrolyte are improved to a large extent as 2.5 times protonic conductivity (4.6 x 10(-2) S cm(-1) at 700 degrees C) and 6.3 times oxygen ionic conductivity (1.2 x 10(-)(2) S cm(-1) at 900 degrees C) compared to BZCYYb electrolyte. Low-temperature (1350 degrees C) sinterability of BZCYYb-0.95 is achieved for the higher concentration of defect compared to the original material (BZCYYb, 1500 degrees C). Meanwhile, a cell with the BZCYYb-0.95 electrolyte illustrates prominent power density of 794 mW cm(-2) at 650 degrees C, superior to the cell with BZCYYb (643 mW cm(-2)) at the same condition. The collaborative diffusions of dualion via two different conducting mechanisms enhance the cell performance with BZCYYb-0.95 electrolyte. The cell voltage and power density actually have no observable performance degradation during the course of the 300-h test. Therefore, it indicates the dual-ion diffusions of BZCYYb-0.95 electrolyte as the promising future for practical application.

High performance of anode supported BaZr0.1Ce0.7Y0.2O3−δ(BZCY) electrolyte cell for IT-SOFC

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

A high performance intermediate temperature fuel cell based on a thick oxide–carbonate electrolyte

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Fabrication and Performance of BaCe0.8Y0.2O3−δ–BaZr0.8Y0.2O3−δ Bilayer Electrolyte for Anode-Supported Solid Oxide Fuel Cells

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Chemically Stable Yttrium and Tin Co‐Doped Barium Zirconate Electrolyte for Next Generation High Performance Proton‐Conducting Solid Oxide Fuel Cells

Chemically Stable BaZr0.7Pr0.1Y0.2O3-δ-BaCe0.8Y0.2O3-δ Bilayer Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

A high performance BaZr0.1Ce0.7Y0.2O3-δ-based solid oxide fuel cell with a cobalt-free Ba0.5Sr0.5FeO3-δ–Ce0.8Sm0.2O2-δ composite cathode

A Novel Layered Perovskite Cathode for Proton Conducting Solid Oxide Fuel Cells

A novel single phase cathode material for a proton-conducting SOFC

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Manipulating Cation Nonstoichiometry Towards Developing Better Electrolyte for Self-Humidified Dual-Ion Solid Oxide Fuel Cells

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Enhanced Performance of Protonic Solid Oxide Steam Electrolysis Cell of Zr-Rich Side BaZr0.6Ce0.2Y0.2O3-δ Electrolyte with an Anode Functional Layer

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Bilayered BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ /Ce 0.8 Sm 0.2 O 2-δ electrolyte membranes for solid oxide fuel cells with high open circuit voltages

Composite electrolyte used for low temperature SOFCs to work at 390°C