Abstract:Proton conductor-based solid oxide fuel cells (SOFCs) and electrolysis cells (SOECs) are receiving increasing attention because of their potential for operation at intermediate temperatures (400 - 600 o C) with high energy efficiency at low cost. In addition, water is formed/provided on the air electrode side of proton-conducting cells, effectively avoiding fuel dilution and nickel oxidation problems associated with oxide-ion conductor-based cells. To date, doped barium cerates-based perovskite oxides are the most widely adopted proton conducting electrolytes due to their desired electrochemical properties. To achieve high proton conductivity, acceptor doping with rare earth elements is a commonly used strategy, which is critical to the formation of protonic defects. Although many trivalent elements have been studied as dopants in the barium cerate family and reasonable electrochemical performance has been demonstrated, the effect of acceptor dopants on other properties of electrolyte materials, especially in single cells under operating conditions, is yet to be studied in detail. In this presentation, we will report our recent progress in the development of a series of acceptor-doped proton-conducting electrolytes. The results reveal that conductivity, transference number, chemical stability, and compatibility with NiO are all closely correlated with dopant size. In particular, the reactivity with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, an optimized electrolyte shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, reversible protonic ceramic electrochemical cells (R-PCECs) based on the optimized electrolyte demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.2 W cm -2 at 600 o C in the fuel cell mode and a high current density of 2.0 A cm -2 at 1.3 V and 600 o C in the steam electrolysis mode while maintaining long-term durability for over 1000 h without obvious degradation.

Manipulating Cation Nonstoichiometry Towards Developing Better Electrolyte for Self-Humidified Dual-Ion Solid Oxide Fuel Cells

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Designing High Interfacial Conduction Beyond Bulk Via Engineering the Semiconductor–Ionic Heterostructure CeO2−δ/BaZr0.8Y0.2O3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications

Tailoring triple charge conduction in BaCo<sub>0.2</sub>Fe<sub>0.1</sub>Ce<sub>0.2</sub>Tm<sub>0.1</sub>Zr<sub >0.3</sub>Y<sub>0.1</sub>O<sub>3-</sub> semiconductor electrolyte for boosting solid oxide fuel cell performance

Enhancing the sinterability and electrical properties of BaZr<sub>0.1</sub>Ce<sub>0.7</sub>Y<sub>0.2</sub>O<sub>3-</sub>proton-c onducting ceramic electrolyte

Tuning an ionic-electronic mixed conductor NdBa0.5Sr0.5Co1.5Fe0.5O5+δ for electrolyte functions of advanced fuel cells

Characterization and Optimization of Highly Active and Ba-deficient BaCo0.4Fe0.4Zr0.1Y0.1O3--based Cathode Materials for Protonic Ceramics Fuel Cells

Cyo-Bzcyo Composites With Enhanced Proton Conductivity: Candidate Electrolytes For Low-Temperature Solid Oxide Fuel Cells

Application of a Triple-Conducting Heterostructure Electrolyte of Ba0.5Sr0.5Co0.1Fe0.7Zr0.1Y0.1O3−δ and Ca0.04Ce0.80Sm0.16O2−δ in a High-Performance Low-Temperature Solid Oxide Fuel Cell

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte

Towards Highly Dense Electrolytes at Lower Sintering Temperature (∼1200 °C): Optimization Strategies for BaCe0.7Zr0.1CuxY0.2-xO3-δ in SOFCs

Designing High Interfacial Conduction beyond Bulk via Engineering the Semiconductor-Ionic Heterostructure CeO 2-δ /BaZr 0.8 Y 0.2 O 3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications

Economical preparation and characterization of dual-ion conducting fuel cell

High Performance and Stability Enabled by Tuning the Component Thermal Expansion Coefficients of a Proton-Conducting Solid Oxide Cell Operating at High Steam Concentration

Shaping Triple-Conducting Semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ into an Electrolyte for Low-Temperature Solid Oxide Fuel Cells

High-entropy design in sintering aids for proton-conducting electrolytes of solid oxide fuel cells

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

Theoretical and experimental explored tailored hybrid H+/O2– ions conduction: Bridged for high performance fuel cell and water electrolysis

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design