Abstract:Semiconductor heterostructures offer a high ionic conduction path enhanced by built-in electric field at the interface, which helps to avoid electronic conduction in low-temperature solid oxide fuel cells (LT-SOFCs). In this study, we synthesized a semiconductor heterostructure based on Co-doped ZnO and Sm0.2Ce0.8O2-delta (SDC) for LT-SOFC application. First, we optimized the composition of the Co-doped ZnO by varying the doping concentration. The cell with Co0.2Zn0.8O composition (sigma(i) =0.158 S cm(-1)) yielded the best performance of 664 mW cm(-2) at 550 degrees C. This optimized composition of Co-doped ZnO was mixed with a well-known ionic conductor Sm0.2Ce0.8O2-delta (SDC) to further improve the ionic conductivity and performance of the cell. The heterostructure formed between these two semiconductor materials improved the ionic conductivity of this composite material to 0.24 S cm(-1) at 550 degrees C, which is 2 orders higher in magnitude than that of bulk SDC. The fuel cells fabricated with this promising semiconductor-ionic heterostructure material produced an outstanding power density of 928 mW cm(-2) at 550 degrees C. Our further investigation shows protonic conduction (H+) in the Co0.2Zn0.8O-SDC composite, which exhibited protonic conduction 0.088 S cm(-1) with a power density of 388 mW cm(-2). at 550 degrees C. A detailed characterization of the material and the fuel cells is performed with the help of different electrochemical (electrochemical impedance spectroscopy (EIS)), spectroscopic (X-ray diffraction (XRD), UV-vis spectroscopy, X-ray photoelectron spectroscopy (XPS)), and microscopic techniques (scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectrometry (EDX)). The stability of the cell was tested for 35 h to ensure stable operation of these devices. This semiconductor-ionic heterostructure composite provides insight into the development of electrolyte membranes for advanced SOFCs.

Economical preparation and characterization of dual-ion conducting fuel cell

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Single composite electrolyte prepared by infiltration and characterization

Manipulating Cation Nonstoichiometry Towards Developing Better Electrolyte for Self-Humidified Dual-Ion Solid Oxide Fuel Cells

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Enhancing the sinterability and electrical properties of BaZr<sub>0.1</sub>Ce<sub>0.7</sub>Y<sub>0.2</sub>O<sub>3-</sub>proton-c onducting ceramic electrolyte

Repeatable preparation of defect-free electrolyte membranes for proton-conducting fuel cells

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Tuning an ionic-electronic mixed conductor NdBa0.5Sr0.5Co1.5Fe0.5O5+δ for electrolyte functions of advanced fuel cells

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

Designing High Interfacial Conduction beyond Bulk via Engineering the Semiconductor-Ionic Heterostructure CeO 2-δ /BaZr 0.8 Y 0.2 O 3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

Tailoring triple charge conduction in BaCo<sub>0.2</sub>Fe<sub>0.1</sub>Ce<sub>0.2</sub>Tm<sub>0.1</sub>Zr<sub >0.3</sub>Y<sub>0.1</sub>O<sub>3-</sub> semiconductor electrolyte for boosting solid oxide fuel cell performance

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte

Bilayered BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ /Ce 0.8 Sm 0.2 O 2-δ electrolyte membranes for solid oxide fuel cells with high open circuit voltages

Electrochemical Properties of a Dual-Ion Semiconductor-Ionic Co0.2Zn0.8O-Sm0.20Ce0.80O2−δ Composite for a High-Performance Low-Temperature Solid Oxide Fuel Cell

Designing p-n heterostructure of LSCF-CeO2 material for ionic transportation as an electrolyte for semiconductor ion membrane fuel cell