Abstract:Semiconductor heterostructures offer a high ionic conduction path enhanced by built-in electric field at the interface, which helps to avoid electronic conduction in low-temperature solid oxide fuel cells (LT-SOFCs). In this study, we synthesized a semiconductor heterostructure based on Co-doped ZnO and Sm0.2Ce0.8O2-delta (SDC) for LT-SOFC application. First, we optimized the composition of the Co-doped ZnO by varying the doping concentration. The cell with Co0.2Zn0.8O composition (sigma(i) =0.158 S cm(-1)) yielded the best performance of 664 mW cm(-2) at 550 degrees C. This optimized composition of Co-doped ZnO was mixed with a well-known ionic conductor Sm0.2Ce0.8O2-delta (SDC) to further improve the ionic conductivity and performance of the cell. The heterostructure formed between these two semiconductor materials improved the ionic conductivity of this composite material to 0.24 S cm(-1) at 550 degrees C, which is 2 orders higher in magnitude than that of bulk SDC. The fuel cells fabricated with this promising semiconductor-ionic heterostructure material produced an outstanding power density of 928 mW cm(-2) at 550 degrees C. Our further investigation shows protonic conduction (H+) in the Co0.2Zn0.8O-SDC composite, which exhibited protonic conduction 0.088 S cm(-1) with a power density of 388 mW cm(-2). at 550 degrees C. A detailed characterization of the material and the fuel cells is performed with the help of different electrochemical (electrochemical impedance spectroscopy (EIS)), spectroscopic (X-ray diffraction (XRD), UV-vis spectroscopy, X-ray photoelectron spectroscopy (XPS)), and microscopic techniques (scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectrometry (EDX)). The stability of the cell was tested for 35 h to ensure stable operation of these devices. This semiconductor-ionic heterostructure composite provides insight into the development of electrolyte membranes for advanced SOFCs.

Tailoring triple charge conduction in BaCo<sub>0.2</sub>Fe<sub>0.1</sub>Ce<sub>0.2</sub>Tm<sub>0.1</sub>Zr<sub >0.3</sub>Y<sub>0.1</sub>O<sub>3-</sub> semiconductor electrolyte for boosting solid oxide fuel cell performance

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Application of a Triple-Conducting Heterostructure Electrolyte of Ba0.5Sr0.5Co0.1Fe0.7Zr0.1Y0.1O3−δ and Ca0.04Ce0.80Sm0.16O2−δ in a High-Performance Low-Temperature Solid Oxide Fuel Cell

Low-temperature Solid Oxide Fuel Cells Based on Tm-doped SrCeO2-δ Semiconductor Electrolytes

Electrochemical Properties of a Dual-Ion Semiconductor-Ionic Co0.2Zn0.8O-Sm0.20Ce0.80O2−δ Composite for a High-Performance Low-Temperature Solid Oxide Fuel Cell

Shaping Triple-Conducting Semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ into an Electrolyte for Low-Temperature Solid Oxide Fuel Cells

Boosting the Electrochemical Performance of Oxygen Electrodes Via the Formation of LSCF-BaCe0.9-xMoxY0.1O3-8 Triple Conducting Composite for Solid Oxide Fuel Cells: Part II

Boosting the Electrochemical Performance of Oxygen Electrodes Via the Formation of LSCF-BaCe0.9–xMoxY0.1O3–δ Triple Conducting Composite for Solid Oxide Fuel Cells: Part II

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Self-Assembled Triple (H+/O2−/e−) Conducting Nanocomposite of Ba-Co-Ce-Y-O into an Electrolyte for Semiconductor Ionic Fuel Cells

Manipulating Cation Nonstoichiometry Towards Developing Better Electrolyte for Self-Humidified Dual-Ion Solid Oxide Fuel Cells

Optimizing oxygen vacancies and electrochemical performance of CeO2- δ nanosheets through the combination of di- and tri-valent doping

Tuning an ionic-electronic mixed conductor NdBa0.5Sr0.5Co1.5Fe0.5O5+δ for electrolyte functions of advanced fuel cells

Electrochemical Properties of a Co-Doped SrSnO3−δ-Based Semiconductor As an Electrolyte for Solid Oxide Fuel Cells

Processing of high-performance Co doped Y2O3 as a single-phase electrolyte for low temperature solid oxide fuel cell (LT-SOFC)

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

Tuning Semiconductor LaFe0.65Ti0.35O3-δ to Fast Ionic Transport for Advanced Ceramics Fuel Cells

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

Effects of Co-Doped Barium Cerate Additive on Morphology, Conductivity and Electrochemical Properties of Samarium Doped Ceria Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Towards Highly Dense Electrolytes at Lower Sintering Temperature (∼1200 °C): Optimization Strategies for BaCe0.7Zr0.1CuxY0.2-xO3-δ in SOFCs