Abstract:Proton-conducting solid oxide fuel cells, incorporating BaZr0.1Ce0.7Y0.2O3−δ (BZCY) electrolyte, NiO–BZCY anode, and Sm0.5Sr0.5CoO3−δ–Ce0.8Sm0.2O2−δ (SSC–SDC) cathode, were successfully fabricated by a combined co-pressing and printing technique after a one-step co-firing process at 1100, 1150, or 1200°C. Scanning electron microscope (SEM) results revealed that the co-firing temperature significantly affected not only the density of the electrolyte membrane but the grain size and porosity of the electrodes. Influences of the co-firing temperature on the electrochemical performances of the single cells were also studied in detail. Using wet hydrogen (2% H2O) as the fuel and static air as the oxidant, the cell co-fired at 1150°C showed the highest maximum power density (PDmax) of 552 and 370mWcm−2 at 700 and 650°C, respectively, while the one co-fired at 1100°C showed the highest PDmax of 276 and 170mWcm−2 at 600 and 550°C, respectively. The Arrhenius equation was proposed to analyze the dependence of the PDmax on the operating temperature, and revealed that PDmax of the cell co-fired at a lower temperature was less dependent on operating temperature. The influences of the co-firing temperature on the resistances of the single cells, which were estimated from the electrochemical impedance spectroscopy measured under open circuit conditions, were also investigated.

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Evaluation of BaZr0.1Ce0.7Y0.2O3−δ-based Proton-Conducting Solid Oxide Fuel Cells Fabricated by a One-Step Co-Firing Process

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

A Performance Study of Solid Oxide Fuel Cells with BaZr0.1Ce0.7Y0.2O3–δ Electrolyte Developed by Spray‐Modified Pressing Method

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

High Performance La0.5(Ba0.2Sr0.2Ca0.1)Co0.8Fe0.2O3-δ- BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Synthesis And Characterization Of Bazr0.3ce0.5y0.2-Xybxo3-Delta Proton Conductor For Solid Oxide Fuel Cells

A Cobalt-Free Sm0.5Sr0.5FeO3−δ–BaZr0.1Ce0.7Y0.2O3−δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Scalable Fabrication Process for New Structure BaZr0.8Y0.2O3-δ-based Protonic Ceramic Fuel Cells

A Novel Anode Supported BaCe0.7Ta0.1Y0.2O3−δ Electrolyte Membrane for Proton-Conducting Solid Oxide Fuel Cell

Characterization of Ba0.5Sr0.5Co0.7In0.1Fe0.2O3−δ As the Cathode Material for Proton‐conducting SOFCs

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

A Novel PrBaCo2O5+σ-BaZr0.1Ce0.7Y0.1Yb0.1O3 Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

New ionic diffusion strategy to fabricate proton-conducting solid oxide fuel cells based on a stable La2Ce2O7 electrolyte

Proton-conducting Solid Oxide Fuel Cells Prepared by a Single Step Co-Firing Process

Preparation of BaZr0.1Ce0.7Y0.2O3−δ Thin Membrane Based on a Novel Method-Drop Coating