Abstract:In this study one step co-synthesis method is investigated to prepare La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-delta Gd0.1Ce0.9O2-delta (LSCFN-GDC), with the purpose of developing a facile and optimized electrode fabrication procedure for Zirconia electrolyte based symmetric solid oxide fuel cell (SOFC). The co-synthesized LSCFN-GDC shows distinct co-existence of perovskite and fluorite structure with high chemical compatibility and remarkable optimized electrode microstructure compared with the physical mixing one. The particle size of both LSCFN and GDC are obviously decreased and the electrode porosity is increased using the co-synthesized method. As a result, the polarization resistance of LSCFN-GDC electrode is dramatically decreased to 0.022 Omega.cm(2), compared with 0.051 U cm(2) of the physical mixing one, at 850 similar to C in air. Symmetrical single cells with a configuration of LSCFN-GDC parallel to GDC vertical bar YSZ vertical bar GDC parallel to LSCFN-GDC are successfully fabricated and characterized under various fuels of H-2, CH4 and C3H8. Results show that, the maximum power densities are discovered to be 348mW.cm(-2) and 324mW.cm(-2) at 850 degrees C under room temperature humidified hydrogen and propane, respectively, yielding a tremendous cell performance improvement. Moreover, the long-term operation of such symmetrical single cell is demonstrated to be stable for more than 100 h under both hydrogen and propane. (c) 2017 Published by Elsevier Ltd.

Solid oxide fuel cell with a spin-coated yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolyte

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Low Temperature Deposited (ce,gd)o2−x Interlayer for La0.6Sr0.4Co0.2Fe0.8O3 Cathode Based Solid Oxide Fuel Cell

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Fabrication and Performance of La0.6sr0.4co0.2fe0.8o3-Delta Infiltrated-Yttria-Stabilized Zirconia Cathode on Anode-Supported Solid Oxide Fuel Cell

Preparation, Evaluation, and Application of SUS430/441 Interconnect with Mn-Co Coating in Solid Oxide Fuel Cells

Sputter-deposited medium-temperature solid oxide fuel cells with multi-layer electrolytes

Synthesis and Characterization of (gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel Cell

Fabrication of YSZ/SNDC Bilayer Electrolytes by Spark Plasma Sintering

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Boosting intermediate temperature performance of solid oxide fuel cells via a tri‐layer ceria–zirconia–ceria electrolyte

Performance of a double-layer CGO/YSZ electrolyte for solid oxide fuel cells

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

Lower Down Both Ohmic and Cathode Polarization Resistances of Solid Oxide Fuel Cell Via Hydrothermal Modified Gadolinia Doped Ceria Barrier Layer

Development of a new ceria/yttria-ceria double-doped bismuth oxide bilayer electrolyte low-temperature SOFC with higher stability

Performance Evaluation of Solid Oxide Fuel Cells with Thin Film Electrolyte Fabricated by Binder‐Assisted Slurry Casting

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Preparation and Properties of Gd3+ and Y3+ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray