Abstract:Proton-conducting solid oxide fuel cells (P-SOFCs) are widely studied for their lower working temperatures than oxygen-ion-conducting SOFCs (O-SOFCs). Due to the elevated preparation and operation temperatures varying from 500 °C to 1500 °C, high mechanical stresses can be developed in the electrolytes of SOFCs. The stresses will in turn impact the electrical conductivities, which is often omitted in current studies. In this work, the mechanical–conductive behaviors of Y-doped BaZrO3 (BZY) electrolytes for P-SOFCs under high temperatures are studied through molecular dynamics modeling. The Young's moduli of BZY in fully hydrated and non-hydrated states are calculated with different Y-doping concentrations and at different temperatures. It is shown that Y doping, oxygen vacancies, and protonic point defects all lead to a decrease in the Young's moduli of BZY at 773 K. The variations in the conductivities of BZY are then investigated by calculating the diffusion rates of protons in BZY at different triaxial, biaxial, and uniaxial strains from 673 K to 873 K. In all cases, the diffusion rate present a trend of first increasing and then decreasing from compression state to tension state. The variations in elementary affecting factors of proton diffusion, including hydroxide rotation, proton transfer, proton trapping, and proton distribution, are then analyzed in detail under different strains. It is concluded that the influences of strains on these factors collectively determine the changes in proton conductivity.

Proton-Conducting Solid Oxide Fuel Cells with Yttrium-Doped Barium Zirconate Electrolyte Films Sintered at Reduced Temperatures

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

An Easily Sintered, Chemically Stable, Barium Zirconate‐Based Proton Conductor for High‐Performance Proton‐Conducting Solid Oxide Fuel Cells

Chemically Stable Yttrium and Tin Co‐Doped Barium Zirconate Electrolyte for Next Generation High Performance Proton‐Conducting Solid Oxide Fuel Cells

Chemically stable and easily sintered high-temperature proton conductor BaZr0.8In0.2O3-δ for solid oxide fuel cells

High-Temperature Mechanical–Conductive Behaviors of Proton-Conducting Ceramic Electrolytes in Solid Oxide Fuel Cells

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Composite electrolyte used for low temperature SOFCs to work at 390°C

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

BaZr0.1Ce0.7Y0.2O3−δ Proton-Conducting Electrolyte Prepared by Gel-Casting for Low-Temperature Solid Oxide Fuel Cells

Synthesis And Characterization Of Bazr0.3ce0.5y0.2-Xybxo3-Delta Proton Conductor For Solid Oxide Fuel Cells

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Efficiently enhance the proton conductivity of YSZ-based electrolyte for low temperature solid oxide fuel cell

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Advanced fuel cell based on semiconductor perovskite La–BaZrYO3-δ as an electrolyte material operating at low temperature 550 °C