Abstract:Yttrium and indium co-doped barium zirconate is investigated to develop a chemically stable and sintering active proton conductor for solid oxide fuel cells (SOFCs). BaZr0.8Y0.2-xInxO3- possesses a pure cubic perovskite structure. The sintering activity of BaZr0.8Y0.2-xInxO3- increases significantly with In concentration. BaZr0.8Y0.15In0.05O3- (BZYI5) exhibits the highest total electrical conductivity among the sintered oxides. BZYI5 also retains high chemical stability against CO2, vapor, and reduction of H-2. The good sintering activity, high conductivity, and chemical stability of BZYI5 facilitate the fabrication of durable SOFCs based on a highly conductive BZYI5 electrolyte film by cost-effective ceramic processes. Fully dense BZYI5 electrolyte film is successfully prepared on the anode substrate by a facile drop-coating technique followed by co-firing at 1400 degrees C for 5 h in air. The BZYI5 film exhibits one of the highest conductivity among the BaZrO3-based electrolyte films with various sintering aids. BZYI5-based single cells output very encouraging and by far the highest peak power density for BaZrO3-based proton-conducting SOFCs, reaching as high as 379 mW cm(-2) at 700 degrees C. The results demonstrate that Y and In co-doping is an effective strategy for exploring sintering active and chemically stable BaZrO3-based proton conductors for high performance proton-conducting SOFCs.

An Easily Sintered, Chemically Stable, Barium Zirconate‐Based Proton Conductor for High‐Performance Proton‐Conducting Solid Oxide Fuel Cells

Chemically stable and easily sintered high-temperature proton conductor BaZr0.8In0.2O3-δ for solid oxide fuel cells

Chemically Stable Yttrium and Tin Co‐Doped Barium Zirconate Electrolyte for Next Generation High Performance Proton‐Conducting Solid Oxide Fuel Cells

Proton-Conducting Solid Oxide Fuel Cells with Yttrium-Doped Barium Zirconate Electrolyte Films Sintered at Reduced Temperatures

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Synthesis And Characterization Of Bazr0.3ce0.5y0.2-Xybxo3-Delta Proton Conductor For Solid Oxide Fuel Cells

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

New Gd-Zn Co-Doping Enhanced Mechanical Properties of BaZrO3 Proton Conductors with High Conductivity for IT-SOFCs

High Performance La0.5(Ba0.2Sr0.2Ca0.1)Co0.8Fe0.2O3-δ- BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

A novel BaFe<sub>0.8</sub>Zn<sub>0.1</sub>Bi<sub>0.1</sub>O<sub>3-</sub> cathode for proton conducting solid oxide fuel cells

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

Improved mechanical strength, proton conductivity and power density in an ‘all-protonic’ ceramic fuel cell at intermediate temperature

Pr doped barium cerate as the cathode material for proton-conducting SOFCs

Sr and Fe co-doped Ba2In2O5 as a new proton-conductor-derived cathode for proton-conducting solid oxide fuel cells

Fabrication and Characterization of Anode-supported Solid Oxide Fuel Cell Based on Proton Conductor Electrolyte

Novel PrBa0.9Ca0.1Co2-xZnxO5+δ double-perovskite as an active cathode material for high-performance proton-conducting solid oxide fuel cells

A Mixed-Conducting BaPr0.8In0.2O3−δ Cathode for Proton-Conducting Solid Oxide Fuel Cells

Cyo-Bzcyo Composites With Enhanced Proton Conductivity: Candidate Electrolytes For Low-Temperature Solid Oxide Fuel Cells

Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells

Sintering and Electrochemical Performance of Y2o3-Doped Barium Zirconate with Bi2o3 As Sintering Aids