Abstract:Ceramic proton conductors have the potential to lower the operating temperature of solid oxide cells (SOCs) to the intermediate temperature range of 400–600 °C. This is attributed to their superior ionic conductivity compared to oxide ion conductors under these conditions. However, prominent proton-conducting materials, such as yttrium-doped barium cerates and zirconates with specified compositions like BaCe1−xYxO3−δ (BCY), BaZr1−xYxO3−δ (BZY), and Ba(Ce,Zr)1−yYyO3−δ (BCZY), face significant challenges in achieving dense electrolyte membranes. It is suggested that the incorporation of transition and alkali metal oxides as sintering additives can induce liquid phase sintering (LPS), offering an efficient method to facilitate the densification of these proton-conducting ceramics. However, current research underscores that incorporating these sintering additives may lead to adverse secondary effects on the ionic transport properties of these materials since the concentration and mobility of protonic defects in a perovskite are highly sensitive to symmetry change. Such a drop in ionic conductivity, specifically proton transference, can adversely affect the overall performance of cells. The extent of variation in the proton conductivity of the perovskite BCZY depends on the type and concentration of the sintering aid, the nature of the sintering aid precursors used, the incorporation technique, and the sintering profile. This review provides a synopsis of various potential sintering techniques, explores the influence of diverse sintering additives, and evaluates their effects on the densification, ionic transport, and electrochemical properties of BCZY. We also report the performance of most of these combinations in an actual test environment (fuel cell or electrolysis mode) and comparison with BCZY.

High-Temperature Mechanical–Conductive Behaviors of Proton-Conducting Ceramic Electrolytes in Solid Oxide Fuel Cells

Proton-Conducting Solid Oxide Fuel Cells with Yttrium-Doped Barium Zirconate Electrolyte Films Sintered at Reduced Temperatures

High Performance Dense Proton Ceramic Electrolyte Material

Efficiently enhance the proton conductivity of YSZ-based electrolyte for low temperature solid oxide fuel cell

An Easily Sintered, Chemically Stable, Barium Zirconate‐Based Proton Conductor for High‐Performance Proton‐Conducting Solid Oxide Fuel Cells

Enhancing the diffusion capabilities of oxygen ions and hydrogen protons in Protonic Ceramic Fuel Cells at intermediate temperatures through doping material and ratio adjustments

Cyo-Bzcyo Composites With Enhanced Proton Conductivity: Candidate Electrolytes For Low-Temperature Solid Oxide Fuel Cells

Theoretical Aspects on Doped-Zirconia for Solid Oxide Fuel Cells: from Structure to Conductivity

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

ZnO-doped BaZr0.85Y0.15O3−δ proton-conducting electrolytes: Characterization and fabrication of thin films

Effect of co-sintering temperature on the performance of SOFC with YSZ electrolyte thin films fabricated by dip-coating method

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Towards Highly Dense Electrolytes at Lower Sintering Temperature (∼1200 °C): Optimization Strategies for BaCe0.7Zr0.1CuxY0.2-xO3-δ in SOFCs

Study on the Properties of Ysz Electrolyte Made by Plaster Casting Method and the Applications in Solid Oxide Fuel Cells

Composite electrolyte used for low temperature SOFCs to work at 390°C

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Role of Sintering Aids in Electrical and Material Properties of Yttrium- and Cerium-Doped Barium Zirconate Electrolytes

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Designing Proton Conducting Electrolytes for Low-Temperature Ceramic Fuel Cells

Advanced fuel cell based on semiconductor perovskite La–BaZrYO3-δ as an electrolyte material operating at low temperature 550 °C