Abstract:Ceramic proton conductors have the potential to lower the operating temperature of solid oxide cells (SOCs) to the intermediate temperature range of 400–600 °C. This is attributed to their superior ionic conductivity compared to oxide ion conductors under these conditions. However, prominent proton-conducting materials, such as yttrium-doped barium cerates and zirconates with specified compositions like BaCe1−xYxO3−δ (BCY), BaZr1−xYxO3−δ (BZY), and Ba(Ce,Zr)1−yYyO3−δ (BCZY), face significant challenges in achieving dense electrolyte membranes. It is suggested that the incorporation of transition and alkali metal oxides as sintering additives can induce liquid phase sintering (LPS), offering an efficient method to facilitate the densification of these proton-conducting ceramics. However, current research underscores that incorporating these sintering additives may lead to adverse secondary effects on the ionic transport properties of these materials since the concentration and mobility of protonic defects in a perovskite are highly sensitive to symmetry change. Such a drop in ionic conductivity, specifically proton transference, can adversely affect the overall performance of cells. The extent of variation in the proton conductivity of the perovskite BCZY depends on the type and concentration of the sintering aid, the nature of the sintering aid precursors used, the incorporation technique, and the sintering profile. This review provides a synopsis of various potential sintering techniques, explores the influence of diverse sintering additives, and evaluates their effects on the densification, ionic transport, and electrochemical properties of BCZY. We also report the performance of most of these combinations in an actual test environment (fuel cell or electrolysis mode) and comparison with BCZY.

High Performance Dense Proton Ceramic Electrolyte Material

Towards Highly Dense Electrolytes at Lower Sintering Temperature (∼1200 °C): Optimization Strategies for BaCe0.7Zr0.1CuxY0.2-xO3-δ in SOFCs

High-Temperature Mechanical–Conductive Behaviors of Proton-Conducting Ceramic Electrolytes in Solid Oxide Fuel Cells

Cyo-Bzcyo Composites With Enhanced Proton Conductivity: Candidate Electrolytes For Low-Temperature Solid Oxide Fuel Cells

Design of efficient and durable symmetrical protonic ceramic fuel cells at intermediate temperatures via B-site doping of Ni in BaCe0.56Zr0.2Ni0.04Y0.2O3–δ

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Role of Sintering Aids in Electrical and Material Properties of Yttrium- and Cerium-Doped Barium Zirconate Electrolytes

A High-Performing Proton-Conducting Solid Oxide Fuel Cell with Layered Perovskite Cathode in Intermediate Temperatures

Improved mechanical strength, proton conductivity and power density in an ‘all-protonic’ ceramic fuel cell at intermediate temperature

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Designing Proton Conducting Electrolytes for Low-Temperature Ceramic Fuel Cells

Exploring the Potential of Cold Sintering for Proton-Conducting Ceramics: A Review

Efficiently enhance the proton conductivity of YSZ-based electrolyte for low temperature solid oxide fuel cell

Sintering Composite Electrolytes of Yttria-Doped Bismuth Oxide and Yttria-Stabilized Zirconia for Solid Oxide Fuel Cells

High-entropy design in sintering aids for proton-conducting electrolytes of solid oxide fuel cells

Proton-Conducting Solid Oxide Fuel Cells with Yttrium-Doped Barium Zirconate Electrolyte Films Sintered at Reduced Temperatures

Designing High Interfacial Conduction Beyond Bulk Via Engineering the Semiconductor–Ionic Heterostructure CeO2−δ/BaZr0.8Y0.2O3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications

Design of a Highly Stable and Conductive Electrolyte by Suppressing Barium Copper Oxide Formation at the Grain Interfaces in Cux-doped BaCe0.7Zr0.1Dy0.2-xO3-δ Sintered at a Low Temperature (1200 °C) for SOFCs

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

A Novel Layered Perovskite Cathode for Proton Conducting Solid Oxide Fuel Cells

Composite electrolyte used for low temperature SOFCs to work at 390°C