Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

The composite electrolyte materials for low-temperature solid oxide fuel cell

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Electrolyte material progress of low-temperature SOFC

High Performance Solid-Oxide Fuel Cell: Opening Windows to Low Temperature Application

Recent Advances to the Development of Low‐Temperature Solid Oxide Fuel Cells

R&D for Low Temperature (300 to 600°C) SOFCs

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC

Novel Advanced Solid Oxide Fuel Cells Based On Ceria-Halide Salt Composite Electrolytes

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Direct synthesis of Ce0.8Sm0.2−xZnxO2−δ electrolyte by sol–gel for IT-SOFC

Electrochemical Characterization of LaBaCuCoO5+δ–Sm0.2Ce0.8O1.9 Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Toward Reducing the Operation Temperature of Solid Oxide Fuel Cells: Our Past 15 Years of Efforts in Cathode Development

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

A Bulk-Heterostructure Nanocomposite Electrolyte of Ce0.8Sm0.2O2-δ–SrTiO3 for Low-Temperature Solid Oxide Fuel Cells

Electrochemical Performance of (ba0.5sr0.5)0.9sm0.1co0.8fe0.2o3−δ As an Intermediate Temperature Solid Oxide Fuel Cell Cathode