Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Novel Advanced Solid Oxide Fuel Cells Based On Ceria-Halide Salt Composite Electrolytes

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Intermediate Temperature Fuel Cells Based on Doped Ceria–licl–srcl2 Composite Electrolyte

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

The composite electrolyte materials for low-temperature solid oxide fuel cell

Preparation and Characterization of a Novel Composite Electrolyte Ceria-Sulfate for Intermediate Temperature Solid Oxide Fuel Cells

Ceria-carbonate Electrolyte Ceramic Membrane for Intermediate and Low Temperature Solid Oxide Fuel Cells: A Review

Gadolinium-Doped Ceria–NaCoO2 Heterogeneous Semiconductor Ionic Materials for Solid Oxide Fuel Cell Application

High-Performanced Cathode with A Two-Layered R-P Structure for Intermediate Temperature Solid Oxide Fuel Cells

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC

A High Performance Cathode for Proton Conducting Solid Oxide Fuel Cells

Study on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells

Novel Intermediate Temperature Ceramic Fuel Cells with Doped Ceria-Based Composite Electrolytes

Electrochemical performance of novel cobalt-free oxide Ba0.5Sr0.5Fe0.8Cu0.2O3-δ for solid oxide fuel cell cathode

Nanocomposite Electrode Materials for Low Temperature Solid Oxide Fuel Cells Using the Ceria-Carbonate Composite Electrolytes

R&D for Low Temperature (300 to 600°C) SOFCs

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Novel Nano-Structured Pd+yttrium Doped ZrO2 Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Novel layered perovskite oxide PrBaCuCoO5+δ as a potential cathode for intermediate-temperature solid oxide fuel cells

Superionic Conductivity in Ceria-Based Heterostructure Composites for Low-Temperature Solid Oxide Fuel Cells