Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

The composite electrolyte materials for low-temperature solid oxide fuel cell

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Electrolyte material progress of low-temperature SOFC

Recent Advances to the Development of Low‐Temperature Solid Oxide Fuel Cells

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Progress in proton‐conducting oxides as electrolytes for low‐temperature solid oxide fuel cells: From materials to devices

Recent Progress in Semiconductor-Ionic Conductor Nanomaterial as a Membrane for Low-Temperature Solid Oxide Fuel Cells

R&D for Low Temperature (300 to 600°C) SOFCs

Progress of cathode materials for intermediate and low-temperature solid oxide fuel cells

Research progress of composite cathode materials for Solid oxide fuel cells

Novel Advanced Solid Oxide Fuel Cells Based On Ceria-Halide Salt Composite Electrolytes

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

Study on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells

Nanocomposite Electrode Materials for Low Temperature Solid Oxide Fuel Cells Using the Ceria-Carbonate Composite Electrolytes

A novel yttrium stabilized zirconia and ceria composite electrolyte lowering solid oxide fuel cells working temperature to 400 °C

Advances in Solid Oxide Fuel Cell Technologies: Lowering the Operating Temperatures Through Material Innovations

Superionic Conductivity in Ceria-Based Heterostructure Composites for Low-Temperature Solid Oxide Fuel Cells

Composite electrolyte with proton conductivity for low-temperature solid oxide fuel cell