Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

A novel yttrium stabilized zirconia and ceria composite electrolyte lowering solid oxide fuel cells working temperature to 400 °C

Efficient strategy to boost the electrochemical performance of yttrium stabilized zirconia electrolyte solid oxide fuel cell for low-temperature applications

Composite electrolyte used for low temperature SOFCs to work at 390°C

Efficiently enhance the proton conductivity of YSZ-based electrolyte for low temperature solid oxide fuel cell

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

The composite electrolyte materials for low-temperature solid oxide fuel cell

Doped Zirconia/Ceria Electrolyte Fabricated at Low Temperature

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

Recent Progress in Semiconductor-Ionic Conductor Nanomaterial as a Membrane for Low-Temperature Solid Oxide Fuel Cells

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

Designing Proton Conducting Electrolytes for Low-Temperature Ceramic Fuel Cells

Semiconductor Fe-doped SrTiO3-δ Perovskite Electrolyte for Low-Temperature Solid Oxide Fuel Cell (LT-SOFC) Operating below 520 °C

Impedance analysis of thin YSZ electrolyte for low-temperature solid oxide fuel cells

Solid‐Oxide Fuel Cells: Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating Below 500 °C (Adv. Mater. 48/2017)

Recent progress in the structure optimization and development of proton-conducting electrolyte materials for low-temperature solid oxide cells

Low-temperature Solid Oxide Fuel Cells Based on Tm-doped SrCeO2-δ Semiconductor Electrolytes

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells