Abstract:Proton conducting oxides are attracting increasing attention due to their promising application as electrolytes in solid-state electrochemical devices for energy conversion and chemical production, including protonic ceramic fuel cells, electrolyzers and membrane reactors. BaZrO 3 and Ba(Zr,Ce)O 3 substituted by acceptor dopants are currently the most promising proton conductors. In principle, replacing Zr or Ce with one kind of trivalent element ( e.g. , Y or Yb) can generate oxygen vacancies, which are necessary for the hydration reaction to introduce charge carriers of protons. However, it is commonly recognized that substituting Zr or Ce with Y and Yb simultaneously leads to high performance of the devices, but the reason is not clear. In this work, we studied the transport properties of four different compositional classes: BaZr 0.8− x Ce x Y 0.2 O 3− δ (BZCY20), BaZr 0.8 Y 0.2− x Yb x O 3− δ (BZYYb), BaZr 0.1 Ce 0.7 Y 0.2− x Yb x O 3− δ (BZCYYb) and BaCe 0.8 Y 0.2− x Yb x O 3− δ (BCYYb), at 600, 650 and 700 °C. For BZCY20, the ionic conductivity decreases on replacing Zr in BZY20 with x = 0.1 of Ce, increases with increasing Ce content within x = 0.1–0.5, and decreases on further increasing Ce content from x = 0.5 to 0.8. The ionic transport number increases with increasing Ce content. The ionic conductivity, partial conductivity of oxide ions and hole conductivity of BZCYYb and BCYYb increase with increasing Yb content. Since the increment of hole conductivity is larger, the ionic transport number decreases. For BZYYb, the ionic conductivity decreases and the hole conductivity increases with increasing Yb content, leading to decreasing ionic transport number. Both the high ionic conductivity and transport number are vital factors governing the performance of protonic ceramic cells (PCCs). Therefore, the improved performance of PCCs by adding both Y and Yb into the electrolyte cannot be explained from the viewpoint of electrical properties of the electrolytes. Thereby, we summarized our recent series of studies on the chemical compatibility between the electrolyte and NiO negatrode substrate, and suggested that the loss of dopant was suppressed by partly replacing Y with Yb. The high ionic conduction of the electrolyte can be maintained after co-sintering at high temperature to fabricate PCCs. This might be the real reason for the high performance of the devices using Y and Yb co-substituted electrolytes, prepared by the co-sintering method.

Samarium and Yttrium Codoped BaCeO3 Proton Conductor with Improved Sinterability and Higher Electrical Conductivity

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells

A new stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells

Transport properties of the Ba(Zr,Ce,Y,Yb)O3−δ proton conductor: the real role of co-substitution of Y and Yb

Conductivity of Bi-Doped Ba0.6Sr0.4CeO3 Electrolyte Materials

Synthesis And Characterization Of Bazr0.3ce0.5y0.2-Xybxo3-Delta Proton Conductor For Solid Oxide Fuel Cells

Influence of rare-earth doping on the phase composition, sinterability, chemical stability and conductivity of BaHf0.8Ln0.2O3-δ (Ln = Yb, Y, Dy, Gd) proton conductors

A New Stable BaCeO3‐Based Proton Conductor for Intermediate‐Temperature Solid Oxide Fuel Cells.

Novel Chemically Stable Ba3Ca1.18Nb1.82-xYxO9-delta Proton Conductor: Improved Proton Conductivity through Tailored Cation Ordering

An Easily Sintered, Chemically Stable, Barium Zirconate‐Based Proton Conductor for High‐Performance Proton‐Conducting Solid Oxide Fuel Cells

New Understanding and Improvement in Sintering Behavior of Cerium‐Rich Perovskite‐Type Protonic Electrolytes

Performance of BaCe0.8Y0.2O3-δ Proton Electrolyte Materials for Solid Oxide Fuel Cells by Compositing the Transition Metal Oxide NiO

Chemically stable and easily sintered high-temperature proton conductor BaZr0.8In0.2O3-δ for solid oxide fuel cells

Rapid Gas-Phase Synthesis of the Perovskite-Type BaCe0.7Zr0.1Y0.1Yb0.1O3-δ Proton-Conducting Nanocrystalline Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells

The Chemical Stability and Conductivity of BaCe0.9−xYxNb0.1O3−σ Proton-Conductive Electrolyte for SOFC

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

Influence of ZnO Additive on the Properties of Y-doped BaSnO3 Proton Conductor

Co-precipitation process as an effective and viable route for proton-conducting solid oxide fuel cell applications

Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte