Abstract:Anode-supported solid oxide fuel cells (SOFCs) based on complex-perovskite structured Ba3Ca1.18Nb1.82O9-delta (BCN18) proton-conducting electrolyte membranes have been successfully fabricated by a novel two-step co-sintering method. BCN18 has been reported to have excellent chemical stability against H2O and CO2, but is relatively difficult to densify. In this study, dense BCN18 electrolyte membranes with fine grain size have been obtained by a novel two-step co-sintering method at a relatively low sintering temperature of 1,300 degrees C, compared to the typical high sintering temperature of 1,550 degrees C. Furthermore, the Ni-BaZr0.1Ce0.7Y0.1Yb0.1O3-delta anode obtained by the novel two-step co-sintering method was composed of small particles with high porosity which is advantageous for electrode performance. Single fuel cells using BCN18 as the electrolyte, Ni-BaZr0.1Ce0.7Y0.1Yb0.1O3-delta as anode and Ba0.9Co0.7Fe0.2Nb0.1O3-delta as cathode demonstrated a power density of 106 mW cm(-2) at 750 degrees C, the best fuel cell performance ever reported for the BCN18 electrolyte. These results suggest that the two-step co-sintering method is a promising method to optimize the microstructure, and combined with proper electrodes, enhanced performance of anode-supported SOFCs using BCN18 proton-conducting electrolyte can be obtained. (C) 2012 Elsevier B.V. All rights reserved.

In Situ Fabrication of a Supported Ba3Ca1.18Nb1.82O9−δ Membrane Electrolyte for a Proton‐Conducting SOFC

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Two-step Co-Sintering Method to Fabricate Anode-Supported Ba3Ca1.18Nb1.82O9−δ Proton-Conducting Solid Oxide Fuel Cells

A Novel Anode Supported BaCe0.7Ta0.1Y0.2O3−δ Electrolyte Membrane for Proton-Conducting Solid Oxide Fuel Cell

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

Preparation of an extremely dense BaCe0.8Sm0.2O3-δ thin membrane based on an in situ reaction

A Strategy of Tailoring Stable Electrolyte Material for High Performance Proton-Conducting Solid Oxide Fuel Cells (Sofcs)

A stable and thin BaCe0.7Nb0.1Gd0.2O3-δ membrane prepared by simple all-solid-state process for SOFC

In Situ Formation of Ba 3 CoNb 2 O 9 /Ba 5 Nb 4 O 15 Heterostructure in Electrolytes for Enhancing Proton Conductivity and SOFC Performance

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Fabrication and Characterization of Easily Sintered and Stable Anode-Supported Proton-Conducting Membranes

Layered SmBaCuCoO5+δ and SmBaCuFeO5+δ perovskite oxides as cathode materials for proton-conducting SOFCs

Stable proton-conducting Ca-doped LaNbO4 thin electrolyte-based protonic ceramic membrane fuel cells by in situ screen printing

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Preparation and Characterization of Ba0.5Sr0.5Fe0.9Ni0.1O3−δ–Sm0.2Ce0.8O1.9 Compose Cathode for Proton-Conducting Solid Oxide Fuel Cells

A novel single phase cathode material for a proton-conducting SOFC

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Nano-sized Sm0.5Sr0.5CoO3-δ as the cathode for solid oxide fuel cells with proton-conducting electrolytes of BaCe0.8Sm0.2O2.9