Abstract:An integrated curing simulation methodology considering resin flow and compaction. Computational methods provide effective tools for the prediction of the curing behavior of composites, especially for large‐scale complex composite structures. The flow‐compaction analysis during curing receives insufficient attention in current studies. In this work, an integrated framework considering the heat transfer, the cross‐linking reaction, the flow and compaction, and the stress–strain module is established. A comprehensive resin flow termination criterion is proposed. L‐shaped composites with a stacking layer of [45/90/−45/0]s were fabricated, and the good agreement between the experimentally measured and the numerically predicted contour data validated the current model. Compared with Hubert's model, the prediction accuracy of the thickness and fiber volume content increases by 4.24% and 3.92%, respectively. Correlation analysis between the fiber volume ratio predicted by numerical methods and experimental results (94% for this method, −41% for Hubert's model) demonstrates the well‐capture of nonuniform fiber distribution in curved composites for the current strategy. The overall framework provides an accurate and promising tool for the prediction of the curing behavior of complex composite components. Highlights An integrated numerical methodology is proposed considering the resin flow and compaction. The viscosity‐temperature coupled feature of resin is considered in the permeability coefficients. A comprehensive resin flow termination criterion is proposed for an accurate prediction. The resin content, thickness, and spring‐in angle of L‐shaped laminates are characterized. The good correlation between the experimental and numerical results validates this method. Compared with the model proposed by Hubert, the prediction accuracy improves.

Numerical and Experimental Studies on Cured Shape of Thin Unsymmetric Carbon/Epoxy Laminates

Cured shape of cross-ply thin unsymmetric composite laminates

Cured Deformation and Application of Unsymmetric Composite Thin Laminates

Cured Shapes of Bi-stable CFRP Composite Laminates with the Side Length Exceeding a Critical Value

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Cured Shape Prediction of the Bistable Hybrid Composite Laminate

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

Numerical Optimizing and Experimental Evaluation of Stepwise Rapid High-Pressure Microwave Curing Carbon Fiber/epoxy Composite Repair Patch

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Investigation of the Tensile Performance and Failure Mechanism of Carbon–aramid Hybrid Fibers/epoxy Sandwich Structure Laminates Using the UV-thermal Synergetic Curing Mechanism: Experimentation and Simulation

Experimental Investigation on Deformation and Strength of Carbon/epoxy Laminated Curved Beams

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Study the curing process of composite by numerical model

A 3D modeling of the effect of layup orientation on the thickness uniformity of cured composite L-shaped laminates

Numerical Simulation of Residual Strain/Stress for Composite Laminate During Overall Curing Process

Study on Cure-Induced Residual Stresses and Spring-in Deformation of L-shaped Composite Laminates Using a Simplified Constitutive Model Considering Stress Relaxation