Abstract:Journal of Composite Materials, Ahead of Print. Laminates are produced by stacking prefabricated plies composed of fiber products. Within the aerospace industry, a ply thickness of 125 μm is commonly regarded as the standard. Ply thicknesses of less than 100 μm are generally considered as thin plies. Due to their ability to provide superior mechanical properties relative to conventional laminates thin-ply (TP) laminates are gaining interest in several high-tech industries. Although the research on TP laminates increased over the past few years, a comprehensive evaluation of the mechanical behavior of TP laminates accounting for the ply-thickness is an ongoing challenge due to the intricacies of ply interactions, and experimental difficulties. The mechanical response of fiber reinforced polymer laminates is governed by damage progression during loading, with the thickness of individual plies playing a crucial role in influencing the initiation and evolution of local cracks and failures. Therefore, in this study, the effective mechanical properties of carbon fiber reinforced polymer composite with varied ply thicknesses have been experimentally evaluated and the accumulation of the damage events has been monitored using acoustic emission measurements, utilizing a contactless laser vibrometer. In this experimental study, the ply thickness is increased in a systematic manner (ranging from 50 μm to 200 μm). Experimental investigation has been carried out in quasi-static tension and compression. The results show that unnotched TP laminates subjected to tensile loading demonstrate enhanced effective strength, attributed to less premature failure. Conversely, as the thickness of the lamina increases, there is a reduction in the overall strength of the laminate. However, in the case of the notched specimen lowest strength has been observed at a ply-thickness of 100 μm in this study. Under compressive loading, unnotched and notched specimen tends to show similar mechanical behavior to unnotched specimens under tensile loading. The overall strength is raised with decreasing ply thickness. The findings from this study may be valuable for incorporating ply-thickness considerations into models for predicting the mechanical performance of laminates under dynamic loading.

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Thickness Variation Effect on Compressive Properties of Ultra-Thick CFRP Laminates

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Experimental and simulation study on compressive failure evolution of multidirectional laminates with different dimensions

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

Impact responses and residual flexural properties of narrow CFRP laminates

Damage and Failure Mechanisms of CFRP Due to Manufacturing Induced Wrinkling Defects

Compressive Strength Determined for Ultrahigh Modulus Fiber Reinforced Composites by [90/0]ns Laminates

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Evaluating the mechanical behavior of carbon composites with varied ply-thicknesses using acoustic emission measurements

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Study on biaxial tensile failure behavior of ultra-thin-ply carbon fiber reinforced composites

A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates under Three-Point Bending Using Acoustic Emission

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Compressive Damage and Heat Release of Composite Laminate with Circular Prefabricated Defect, Part II-numerical Method

Simulation and analysis of delamination damage propagation in CFRP structures

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Numerical investigation on the variation of compressive failure mechanisms in unidirectional carbon fiber reinforced polymer

Experimental Study on Compression Failure of Composite Laminates with Prefabricated Surface Cracks

Static behavior of thick flax/epoxy composite laminates: multi-instrumentation mechanical failure analysis